So who wants their ECU's "Chromed"?

[Greg E]

Can you rehost the file I was trying to download it and test it out when I get my 98sl ecu in. My cable is on the way from blackstealth(Great guy helped me alot)

Rehosted for you man!

[TurboSinceBirth]

Another very expensive but more than worth while investment for this setup is a brand new Mitsubishi Throttle Body. That alone will make your car run stock smooth....or at least a remaned one with new seals, IAC and FIAV.

I'm a big DIY'er and already have a quality set of seals plus OEM gaskets so if I don't get it to seal up on the first shot I will try it again. I found a few different sources for the seals so I'm sure I can come up with what I need to get it to work. I'd rather upgrade the throttle body than go new but it all comes down to whether or not the rebuild works out. If not I may be shelling out the cash for a plenum and Q45 tb.

[Monster Stealth]

Has any of the 91-95 guys used one of the EVO MAP adapters for DSM's? This seems like a nice easy solution for us.




2G/EVO MAP Sensor Adapter - JM Fabrications

[Chris@Rvengeperformance]

Another very expensive but more than worth while investment for this setup is a brand new Mitsubishi Throttle Body. That alone will make your car run stock smooth....or at least a remaned one with new seals, IAC and FIAV.

I do have new seals from STM and a new IAC. Do the FIAV's go bad often? mine seems to work as the cold idle is higher than warm.

[Greg E]

Has any of the 91-95 guys used one of the EVO MAP adapters for DSM's? This seems like a nice easy solution for us.



2G/EVO MAP Sensor Adapter - JM Fabrications

That's for running a different map sensor in place of the stock one. won't be of any use to the 91-95 guys since there isn't a map sensor slot on the plenum.

[Monster Stealth]

That's for running a different map sensor in place of the stock one. won't be of any use to the 91-95 guys since there isn't a map sensor slot on the plenum.

I was under the impression that it is what they use to run the OE EVO X map sensor since they do not have a spot for it either.

Example

Here is an example of the one you are thinking of I believe.

STM: INTAKE MANIFOLD SENSOR ADAPTER | 95-99 DSM | EVO VIII-IX

[fridayda13th]

I know where to get a couple 98 sl ecu's I had to pay for the info so when I get home I'm going to post up the info for all to see lol its not a secret just numbers where to order. And greg thank you very much for rehosting that I was looking it over last night great work its a lot of info to take in.

[Greg E]

I was under the impression that it is what they use to run the OE EVO X map sensor since they do not have a spot for it either.

Example

Here is an example of the one you are thinking of I believe.

STM: INTAKE MANIFOLD SENSOR ADAPTER | 95-99 DSM | EVO VIII-IX

Gotcha. Yep, that's what I was thinking of!

[Greg E]

I do have new seals from STM and a new IAC. Do the FIAV's go bad often? mine seems to work as the cold idle is higher than warm.

Pop off the coolant hoses to your TB. if you see a coating of calcium and rust, its probably built up in the FIAV too.

[Chris@Rvengeperformance]

it looked pretty clean when I had it off during the rebuild. thanks though