What did you do today to your 3/S?

[CoopKill]

I should be looking for dnp pipes again...

[familyMAN]

Did some stuff this week....
Pulled an ecu log from cruising around. Found one in third gear so I could throw it in Virtual Dyno. Unfortunately, I was going up a large hill so it should be under-estimating the hp. But it's still fun! Timing is conservative and short pull only to 6400. Through an auto. Enough excuses! ........

Only an 8psi WG spring. As you can see it boost creeps. Only a 38mm WG with poor placement for boost control and a big turbo. It rips in 1st and 2nd gear when it gets up to 7k+. Haven't taken it that far in 3rd yet. Need to get it to a nice straight stretch.

Oh well...my fix for the boost creep. Boost above it! 14psi spring on top of the 8....

Also built a dump tube. Just open after the WG was melting my radiator fan wiring


and some pretty pictures...

[Street_Chally73]

I worked on this over the weekend & am still waiting to hear back on some front crossmembers so I can get a batch of larger items to send off to a local powder coater who has an oven large enough to bake said crossmembers and my front anti-sway bar.
Freshly Powder Coated Upper Intake Plenum - Bright Red 002.jpg
Freshly Powder Coated Upper Intake Plenum - Bright Red 004.jpg
Upper Intake Plenum With Letters Sanded Down - Bright Red 003.jpg
I'm waiting on some replacement MAAS extra fine polishing creme to finish it up with a light hand polish and then it'll get some sealer to lock in the luster for what i hope will be many, many years. :P

[futurevr4man]

I bought a new shell! Time to take it to 11 over this summer/winter

[sergechronos]

I bought a new shell! Time to take it to 11 over this summer/winter

Details man!

[fastfalcon94]

and some pretty pictures...

Did you have your car painted recently? Any pics on here of it now?

[familyMAN]

I had the front bumper, snake eyes, carbon fiber hood and fiberglass hatch (not installed) painted. Those pics are from this weekend. I still need to buy a new Mitsu emblem for the bumper.

Rest of car badly needs clay barred and polished. That's a summer project.

[Boomer3000]

Pulled pan on new engine. Going to swap bearings and put her back together

[MDoe8]

Did some stuff this week....
Pulled an ecu log from cruising around. Found one in third gear so I could throw it in Virtual Dyno. Unfortunately, I was going up a large hill so it should be under-estimating the hp. But it's still fun! Timing is conservative and short pull only to 6400. Through an auto. Enough excuses! ........

Video!

[familyMAN]

Only have another idle vid listening to cam lope. May see if wife can vid a fly-by. Don't have a go-pro to capture inside vid but not sure it would do the experience justice. You guys seriously need to experience a 7k+ awd auto shift from 1st to 2nd. It's a helluva drug.