So who wants their ECU's "Chromed"?

[vr4whore]

I'm using a hand held halo cable, it seems to communicate on 1.3 but not 2.0

[Greg E]

I'm using a hand held halo cable, it seems to communicate on 1.3 but not 2.0

Ah! I have no idea how that cable works but I imagine it's similar to the 1.3.

Can't really help you beyond that.

[vr4whore]

I used the tactrix cable which I know is 2.0 and tried the obdII96+ setting with no codes being stored, but again I know for a fact that I had crappy speed sensor that I just changed so it dissapeared without me cleared the code....

[Greg E]

I used the tactrix cable which I know is 2.0 and tried the obdII96+ setting with no codes being stored, but again I know for a fact that I had crappy speed sensor that I just changed so it dissapeared without me cleared the code....

Sounds like good news.

[vr4whore]

Sounds like good news.

it does but seems more odd, also is 2.6 supposed to say "link engaged" like 100 times when you press start log ?

I still have the cat light flash though

[Greg E]

Feeling experimental?

Switch bit 11 of periphery 0 on, flash to your ecu and tell me what happens. I'm expecting it to run a little rough but that should turn off the light if Black Stealth is correct.

Give it a try and report back here.

[Jesters Deadd]

Experiments! at least you're the first.

[vr4whore]

Feeling experimental?

Switch bit 11 of periphery 0 on, flash to your ecu and tell me what happens. I'm expecting it to run a little rough but that should turn off the light if Black Stealth is correct.

Give it a try and report back here.

Cat light still flashes, but car runs a little jerkier and harder to boost.

I think I'm going to give up for a while lol

[Jesters Deadd]

Do you have a manual for your car? I could help more if I had a gto manual. a pdf would be great.

[Greg E]

Do you have a manual for your car? I could help more if I had a gto manual. a pdf would be great.

Not ready to give up just yet but it would be wise to confirm we are disabling the correct pin.