Page 4 of 8 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 71

Thread: Overheating

  1. #31
    I Kill Threads verified
    Join Date
    Sep 2010
    Owner Since
    2008

    Location
    Wichita KS
    Posts
    271
    Thanks
    3
    Thanked 17 Times in 15 Posts
    I just went and warmed the car up with the coolant reservoir cap off and waited for the fans to come on, but even at 203F they didn't, so I hit the AC to turn them on. It didn't chug any of the coolant from the reservoir either. And checking after the drive it hadn't used anything. I did notice there was bubbles coming from the reservoir as the engine ran, so there must be a leak somewhere allowing air in.

    Went for a drive after it was warmed up, and even with the AC on it only regulates the temperature slightly better. Still will get up to 230-235 and if I cruise for long enough (say I miss a light) then it'll drop down, but it'll soon come back up to about 223.

    I think a blockage or leaking cap would be the most likely cause now, would that be a good assumption? I'll call some places and see if they can check it soon.
    Last edited by Goallie11; 04-18-2011 at 07:14 PM.
    1992 3000GT VR-4
    DR650s,Denso 550 injectors, Walbro 255, Emanage Blue,3SX Cat Eliminator Downpipe,Short Shifter,DNP Hardpipe Kit,HKS SSQV,Underdrive pulley,Carbotech slotted rotors,RPS Lightweight Flywheel, Maximal Solid Mounts

  2. #32
    I'm Kind Of A Big Deal
    Join Date
    Sep 2010
    Owner Since
    2003

    Location
    Easton, Pennsylvania, United States
    Posts
    2,201
    Thanks
    208
    Thanked 102 Times in 86 Posts
    if your radiator fan isn't turning on... then I would start from there. If there were a blockage or a leaking cap, the fan would still turn on when it gets too hot.
    Circa 2005... Oh my, how far I've come
    Quote Originally Posted by Emilie@GZP View Post
    gear wrenches = wrench with the spinny thing inside of the circle part?
    Current:
    2004 ML500 - Mommy Mobile
    1996 Ram 2500 V10 - Tow Vehicle
    1991 Stealth R/T Twin Turbo - Pink Parts, Billet GZP 747's
    1995 3000GT VR-4 - lawn gnome
    1999 3000GT SL - 7,436 miles
    1995 3000GT Spyder - garage ornament

    FOR SALE:
    1995 3000GT Spyder VR-4 Red, 80k miles

  3. #33
    Twin Turbo verified
    Join Date
    Sep 2010
    Owner Since
    2007

    Location
    Melbourne, Australia
    Posts
    2,123
    Thanks
    76
    Thanked 91 Times in 75 Posts
    Quote Originally Posted by Goallie11 View Post
    I did notice there was bubbles coming from the reservoir as the engine ran, so there must be a leak somewhere allowing air in.
    This sounds very much like a head gasket This is what mine did when I had a blown head gasket.
    1990 JDM GTO TT with Vi-PEC plug-in V44 EMS, TD04-13T's, 3SX Downpipe, MP Hi-flow cat, ARC SMIC's, Aeromotive Stealth 340LPH pump, Fuelab 515 FPR, Ninja Performance 75amp hotwire kit, oohnoo fuel loop & rail adapters, Nylon braided ethanol fuel line, NGK AFX Wideband, K&N FIPK, Iridium plugs, HKS Twin Power DLI, Turbo XS racing BOV, 3SX poly mounts, Custom 280km/h speedo.

    Waiting install
    Injector Dynamics 725cc Injectors.

    Build Thread

  4. #34
    Now with more poop-smear Not Verified
    Join Date
    Sep 2010
    Owner Since
    Not Anymore

    Location
    Georgia
    Posts
    6,490
    Blog Entries
    3
    Thanks
    483
    Thanked 543 Times in 390 Posts
    if, once its warmed up, you turn it off and it sounds like gurgling...you really should look at the rad cap. swapping mine out fixed this issue for me.

  5. #35
    I Kill Threads verified
    Join Date
    Sep 2010
    Owner Since
    2008

    Location
    Wichita KS
    Posts
    271
    Thanks
    3
    Thanked 17 Times in 15 Posts
    I just got back from an extended drive from what I normally do and the reservoir was definitely gurgling and the cap was hissing, it also leaked a little bit... So it's looking more like a bad cap.

    Emilie what temp is too hot? I would assume anything above 190 as thats what the thermostat is?

    JOE I really hope it isn't a head gasket, tomorrow I can go get a new cap since I have most of the day free.

  6. #36
    Forum User verified
    Join Date
    Sep 2010
    Owner Since
    August 2003

    Location
    Uniontown
    Posts
    467
    Thanks
    8
    Thanked 12 Times in 11 Posts
    Hey, I tried this to find I had good gaskets. Just one HUGE air bubble after changing my pump out. (my fans worked)

    Combustion Leak Detector, FREE SHIPPING!

  7. The Following User Says Thank You to EvanH For This Useful Post:


  8. #37
    Forum User verified
    Join Date
    Sep 2010
    Owner Since
    August 2003

    Location
    Uniontown
    Posts
    467
    Thanks
    8
    Thanked 12 Times in 11 Posts
    Hey steve. That same kit was recommended in Popular Mechanics, in the June 2010 issue. So please stop trying to pawn everything as rice, and go raid more junkyards. No wonder you keep breaking ring lands, and blowing engines.

  9. #38
    Forum User
    Join Date
    Sep 2010
    Owner Since
    2000

    Posts
    1,241
    Blog Entries
    2
    Thanks
    213
    Thanked 91 Times in 64 Posts
    Quote Originally Posted by steve68 View Post
    I fix them before they get to that stage.

    Steve
    just 28 counts of knock too bad your ecu cant read any more. maby you could add another ecu so you could atleast read 56 counts of knock combined just like twin fprs and stuff .

    I apologise for being far off topic again but I can't help myself
    Last edited by mb7050; 04-19-2011 at 11:04 AM.

  10. #39
    Forum User
    Join Date
    Sep 2010
    Owner Since
    2000

    Posts
    1,241
    Blog Entries
    2
    Thanks
    213
    Thanked 91 Times in 64 Posts
    Quote Originally Posted by EvanH View Post
    Hey, I tried this to find I had good gaskets. Just one HUGE air bubble after changing my pump out. (my fans worked)

    Combustion Leak Detector, FREE SHIPPING!
    gonna buy one myself .

  11. #40
    I'm Kind Of A Big Deal
    Join Date
    Sep 2010
    Owner Since
    2003

    Location
    Easton, Pennsylvania, United States
    Posts
    2,201
    Thanks
    208
    Thanked 102 Times in 86 Posts
    Quote Originally Posted by steve68 View Post
    That's what you do on ALL cars with overheating problems.........my cars don't have overheating problems because I fix them before they get to that stage.
    That's because if you keep on driving them they get worse and more expensive to fix.......popped hoses, popped rad, popped heater, leaking waterpump, bent valves.

    Steve
    So, you're saying that the way to check for a headgasket problem, is to turn your car into a boiling hot geyser?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering