What did you do today to your 3/S?

[j2k4]

Gaping chasm

The maw of the beast...

[jba3]

Holy crap! LS swap?

Probably. His profile says "Project LS3S". Should be interesting!

[murphys_law]

Probably. His profile says "Project LS3S". Should be interesting!

He has a build thread...

Sent from my ONE A2005 using Tapatalk

[MDoe8]

won't post-picture-whore it up but yep, LS

[sergechronos]

My data plan thanks you..after the holidays however, feel free to be a picture whore.

Always excited to see where these sorts of builds lead

[stealthee]

Talked about getting back on it so I can actually drive it, instead of sit in it and make vroom vroom noises.

[DrGonzo]

Got the one main thing I was looking for today in the mail.... My turbo's back from the shop getting balanced. They also cleaned everything on them, honed the bearings housings, and just did a superb job on them. I almost thought they sent me the wrong ones back. Got a week off for the holidays so I'll be working on getting everything all back together.

[MDoe8]

Holy Moly. Was removing the stock engine harness so I pulled the HVAC fan. These things get filthy! Checked out the other cars for comparison and it was identical. They also have a thin metal shield thingy in them that are prone to rust like everything else on our cars. I decided to take it apart and give it a good cleaning and then put a splash of rust prohibiting primer on as well. Yuck!

[j2k4]

...instead of sit in it and make vroom vroom noises.

I don't want to be weird, but I have never done that in my life.

I have known a shit-ton of people who did, unabashedly.



Well...I imagine the noises...maybe I could do that hard enough for others to hear?

[starquest]

My tranny was rebuilt about 2 years ago (by chris hill),, recently i was getting a squealing sound from the tranny area. I had to drop my tranny replaced the throw out bearing (OEM), replaced fidanza flywheel insert, re tap the tranny mount screw holes, got a new starter. Everything installed. this is a new year time to hit 10s....