Page 4 of 10 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 93

Thread: Got my turbo kit today..

  1. #31
    As discussed, I went ahead and made -4AN turbo feed lines. I just didn't trust that the tiny lines that were on it before would sufficiently dissipate heat and provide enough lubrication for a journal bearing turbo. TD04/TD05 turbos have larger oil feeds than the tiny things they sent me and they ALSO have water cooling. Pics:





    In addition, clocking the rear turbo allowed the rear return line to work. After looking at it a little more, it became obvious to me that that would be a simple solution :-P


    The rear motor mount had to modified slightly to allow the rear oil drain to pass by it, though I didn't have to modify the front mount at all (the website says you do):


    More pics coming soon.

  2. #32
    Forum User Not Verified

    Join Date
    Sep 2010
    Owner Since
    2004

    Location
    Cape Girardeau
    Posts
    4,791
    Thanks
    365
    Thanked 296 Times in 214 Posts
    that really looks pretty good. I wish that Chris Hill still worked over there so they had a solid test bed to really demonstrate what it can do.

    Parting 6 speed
    Pampena 3.5 Stroker, GTX 2867 Gen IIs, AEM Series2, oohnoo SMIC, DN Hardpipes, FIC 1650s, Walbro 525, aermotive fpr, Dejon intake pipes, Tial Q, Koyo Rad, Samco Hoses, Stoptech 332mm fronts, HKS GT4 Coilovers, Spec 4+ LW, JDM 6 Speed, Billet shift forks, Pampena brace

  3. #33
    Quote Originally Posted by Forest Gump View Post
    that really looks pretty good. I wish that Chris Hill still worked over there so they had a solid test bed to really demonstrate what it can do.
    Exactly... there are zeeerrrooooo dyno numbers on this thing...

  4. #34
    One fix at a time verified
    Join Date
    Sep 2010
    Owner Since
    2004

    Location
    Kansas
    Posts
    2,158
    Blog Entries
    1
    Thanks
    60
    Thanked 57 Times in 49 Posts
    Quote Originally Posted by JasonY View Post
    TSB is the DR T3 kit.

    Jason
    I had changed it but forgot to take any pics. I didn't use the -10AN flange and 90 degree fitting. Like oohnoo I used these two fittings to connect my -10AN drain line too. It gave me an extra 1/2" or a little more of extra rise.




    I did actually find a bolt on flange through eBay that would be more ideal to give you a negative slope. Turbo Oil Drain Adapter Flange 10AN Billet T3 T4 | eBay
    95 RT/TT Billet TD04s E70, DW1000cc injectors, ARC-2 with 92mm maf, 3SX fuel rail loop, hotwired Walbro 416/485, 3" FMIC, single small Krank vent, DR 3.5" downpipe and cat-back, DNP 02 housings, Hallman Pro MBC, BlackStealth LCDBC, AEM wideband, AEM oil pressure, Apexi S1 coilovers with SCE EVO 8/9 adapters, 3SX adjustable control arms, Spec 3+ clutch, Maximal solids/3SX poly motor mounts, Setrab custom SMOC, stock motor 127k miles, stock drivetrain.

  5. #35
    Been awhile since I've updated you guys -

    :]

  6. #36
    VR-3747 :D Not Verified
    Join Date
    Sep 2010
    Owner Since
    2008

    Location
    Dayton Ohio
    Posts
    1,792
    Blog Entries
    1
    Thanks
    19
    Thanked 123 Times in 86 Posts
    congrats memph!
    rise and rise again until lambs become lions

  7. #37
    Forum User
    Join Date
    Sep 2010
    Owner Since
    1998

    Location
    Easton, Pennsylvania, United States
    Posts
    2,042
    Thanks
    54
    Thanked 135 Times in 105 Posts
    "probably rich" yet has no O2 sensors LOL. Did it smell like 11:1?

  8. #38
    Banned Not Verified Blackmount's Avatar
    Join Date
    Apr 2011
    Owner Since
    Mid-April 2011.

    Location
    Monroe WI
    Posts
    1,466
    Thanks
    78
    Thanked 24 Times in 21 Posts
    Looks good Ryan, post more vids once you get it on the road!!

  9. #39
    Forum User
    Join Date
    Sep 2010
    Owner Since
    2002

    Posts
    1,668
    Thanks
    514
    Thanked 388 Times in 259 Posts


    Your return lines are what, -6? They look too small based on years of watching these sort of build threads and subsequent problems with burning oil, blowing turbos, etc. I use -4 feeds as well (I used banjo fittings at the ports on the oil pump/filter housing, so my -4 lines probably flow less than yours), but my returns are like -10, with a slight down hill path to the pan. Never had an issue... But I bet you will.
    Last edited by AdamVR4; 03-11-2013 at 01:31 PM.
    '93 VR4 | 10.57 @ 135 on C16 | 11.29 @ 125 on 93 | ~3275 lbs

  10. #40
    1st ever COTM and COTY verified
    Join Date
    Aug 2010
    Owner Since
    Birth

    Location
    Tennessee
    Posts
    7,077
    Thanks
    649
    Thanked 451 Times in 347 Posts
    Quote Originally Posted by AdamVR4 View Post


    Your return lines are what, -6? They look too small based on years of watching these sort of build threads and subsequent problems with burning oil, blowing turbos, etc. I use -4 feeds as well (I used banjo fittings at the ports on the oil pump/filter housing, so my -4 lines probably flow less than yours), but my returns are like -10, with a slight down hill path to the pan. Never had an issue... But I bet you will.
    Good point, it might be a problem. Seems like the TD04 has bigger issues with this, not sure why. You remember my return lines were pretty damn small so I ditched them and went with stock. They were so much bigger.

    Quote Originally Posted by HilbillyHomeboy View Post
    I bet she smells of old mustard and sawdust.
    Jeremy

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering