What did you do today to your 3/S?

[FeaRpb]

Are they picking it up at your residential or do you have a loading dock you can use?

Post via Tapatalk

[AdamVR4]

Are they picking it up at your residential or do you have a loading dock you can use?

Post via Tapatalk

At my house.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

[CoopKill]

Can you fix that image?

I will have to re-host them, iFail is not playing nice with the site here.

[CoopKill]

Fixed

[green-lantern]

finally took the time to arrange to have my block and crank picked up to go to pampena. Something like $320 to ship & insure.

Wait wat? I thought you were up and running Adam? What happened?.....or are you building another engine?

[keo92stealth]

Started sanding down the valve covers for paint . Pita

[Chris@Rvengeperformance]

replaced the other 5 rod bearings. No wear, even on the #6 which has shown copper on pretty much any one of these I have taken apart. All spec'ed out between .0015 and .0018. Not going to mess with the mains at this time.

[keo92stealth]

At my house.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Time to buy bigger turbos adam.

[keo92stealth]

replaced the other 5 rod bearings. No wear, even on the #6 which has shown copper on pretty much any one of these I have taken apart. All spec'ed out between .0015 and .0018. Not going to mess with the mains at this time.

Gump you replacing bearings in the white car ?

[Chris@Rvengeperformance]

Gump you replacing bearings in the white car ?

well I had the pan off, so I figured I may as well, but ended up only replacing the rod bearings and not the mains since the rod bearings were in such good shape.