My LCD screen project, boost, WBO2, Knock, etc

[NickS VR4]

So any updates? I see the v2.24 has support for 0-150psi oil pressure gauge. Would that work in slot A?

[BlackStealth]

So any updates? I see the v2.24 has support for 0-150psi oil pressure gauge. Would that work in slot A?

The Oil Pressure Gauge, AEM EGT Gauge, and Water/Alchy injection control are all hacks. The LCD boostcontroller was never designed for these, but when someone requests these things to the existing hardware I find a way.

Currently I'm experimenting with bluetooth, and SD card datalogging options again.

[tfw a-ok]

The Oil Pressure Gauge, AEM EGT Gauge, and Water/Alchy injection control are all hacks. The LCD boostcontroller was never designed for these, but when someone requests these things to the existing hardware I find a way.

Currently I'm experimenting with bluetooth, and SD card datalogging options again.

...and what a great hack it is. I'm currently using a Zeitronix oil pressure sending unit and with the "custom" tap I made with [BlackStealth] help I pulled it off without a glitch.

[NickS VR4]

Any chance we can get an alert feature that will flash the backlight red if certain values go out of range in addition to the buzzer?

[CoopKill]

I am not on the newest update, but mine does flash red when over boosting, and the knock threshold is reached.

[j2k4]

Hey, Bill, I'm not gonna get started on my install for a few weeks (vacation, etc.) but I was wondering where you went through the firewall with the solenoid wires and vac-line?

I still have to line up an instrument cluster to cut up and all, but I'm collecting info...

[CoopKill]

I went through the passenger side under glove box in the existing hole. I will have to drill/grommet another hole if I need to add anything further though.

[j2k4]

I went through the passenger side under glove box in the existing hole. I will have to drill/grommet another hole if I need to add anything further though.

Hmm.

We need Hans or someone with a bunch of extra material to find a place to punch a dedicated hole for add-ons...

[HLxDrummer]

Alright I have a question for ya. I'm having some issues logging using Evoscan. I copied the settings you posted and sometimes it works well and other times it tells me I'm not using a compatible cable (suggests I may be using the 2.0 cable when I am using FTDI). It seems like a bad connection though because it is hit or miss whether it connects and sometimes it will connect then I pull out to begin a pull and it will end the log. Should I try a new cable?

[NickS VR4]

I am not on the newest update, but mine does flash red when over boosting, and the knock threshold is reached.

Disregard my request than. I didn't have it hooked up yet, just didn't recall reading about that feature.

With that said, Great Feature