Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 36

Thread: Disassembly: Radiator Fan Control

  1. #11
    One fix at a time verified
    Join Date
    Sep 2010
    Owner Since
    2004

    Location
    Kansas
    Posts
    2,158
    Blog Entries
    1
    Thanks
    60
    Thanked 57 Times in 49 Posts
    Quote Originally Posted by jba3 View Post
    Do both fans have the same CFM rating? Must be some reason mitsu put a larger fan on one side, instead of making them all the same size.
    I don't know for sure all I know is that the OEM fans flow more cfm than any other fans on the market. Plenty of people have had no issues overheating switching to twin A/C fans. I plan to do it. Maybe it's just part of the factory shrouding but I do know they push quite a bit of air. The A/C fan will give me a little more room too.
    95 RT/TT Billet TD04s E70, DW1000cc injectors, ARC-2 with 92mm maf, 3SX fuel rail loop, hotwired Walbro 416/485, 3" FMIC, single small Krank vent, DR 3.5" downpipe and cat-back, DNP 02 housings, Hallman Pro MBC, BlackStealth LCDBC, AEM wideband, AEM oil pressure, Apexi S1 coilovers with SCE EVO 8/9 adapters, 3SX adjustable control arms, Spec 3+ clutch, Maximal solids/3SX poly motor mounts, Setrab custom SMOC, stock motor 127k miles, stock drivetrain.

  2. #12
    Forum User verified

    Join Date
    Sep 2010
    Owner Since
    1

    Posts
    1,292
    Thanks
    77
    Thanked 89 Times in 55 Posts
    I did this mod to my 1g. Works well! I did have some questions. What's with the -40 cells? Also, for the idle/slow speed settings they are both pretty high temps. Don't we want the fans to be kicking in early here since the car is not moving and there is no airflow?

    Also, do we have target table of temps that we want to hit? Like x degrees at idle and cruise with and without the ac on? Obviously this depends on ambient temps and how hard we drive the car but generals are good.

    Cruising and idle my car wouldn't go above 96C/205F with these new settings with AC on and 90F ambient.

  3. #13
    I lack color... verified

    Join Date
    Sep 2010
    Owner Since
    Aug 1998

    Posts
    3,589
    Thanks
    104
    Thanked 498 Times in 241 Posts
    Mitsubishi intended for the fans to be on at all times with the AC on. Problem is in the winter when you are trying to warm your windows with the defrost they kick on and it takes longer for the coolant to get up to temp thus your car takes more time to warm up.

    In the opposite direction, with out the AC on the other issue is with a FMIC your car over heats...

    Part of me wants to eliminate the thermostat and target 170 deg to see if that helps with knock on pump gas.

    2014 Exomotive Exocet - #101 "shocker yellow" - 1.8L 5-speed 3.9 torsen FMII powered
    Read more: http://mevowners.proboards.com/threa.../greg-pa-build

    99 Solano Black VR4 - #16 of 287 - ground up restoration - sold
    98 Pearl White VR4 #54 of 231 - 12.84@105mph - 93 Octane 12.50@107mph - 100 Octane with Chromed ECU - sold
    99 Pearl White VR4 #108 of 287 - 3RD place stock car class ECG 11 - Sold
    98 Black VR4: 100% stock - totalled by an Illegal 2-12-08
    95 White Stealth TT - 11.852 @ 118.25 - sold
    95 SSG Stealth TT - 11.981 @ 115.81mph - sold

    "I don't actually work on cars, I just talk about them on the internet."

  4. #14
    Member verified
    Join Date
    Sep 2012
    Owner Since
    2010

    Location
    Decatur, TN
    Posts
    1,671
    Blog Entries
    7
    Thanks
    57
    Thanked 71 Times in 60 Posts
    Actually, small coincidence, was going to look it up and see what the Evos ran with FMIC. I set mine in the flash ECU (will be doing the actual flashing in the next day or two) about 10-15 degrees cooler, but wasn't sure if that was too much or not enough.. This pretty much did all the research for me. Thanks man.
    Mods: 2g 3k body conversion, 2g Brake upgrade, Rota P45R rims
    Projects: Interior sound deadening, 14Bs, forged bottom end, custom radiator and sound mounts

  5. #15
    Member Not Verified
    Join Date
    Nov 2010
    Owner Since
    2003

    Posts
    2,062
    Thanks
    112
    Thanked 272 Times in 206 Posts
    Quote Originally Posted by Greg E View Post
    eliminate the thermostat.
    requires welding........just in case you were thinking it could be done by just removing the stat, which it can't. FYI.

  6. #16
    Forum User verified

    Join Date
    Sep 2010
    Owner Since
    1

    Posts
    1,292
    Thanks
    77
    Thanked 89 Times in 55 Posts
    Quote Originally Posted by Greg E View Post

    Part of me wants to eliminate the thermostat and target 170 deg to see if that helps with knock on pump gas.
    Just had a thought. Would it be a good idea on the dyno to run all the fans full bore when doing pulls?

  7. #17
    I lack color... verified

    Join Date
    Sep 2010
    Owner Since
    Aug 1998

    Posts
    3,589
    Thanks
    104
    Thanked 498 Times in 241 Posts
    Quote Originally Posted by Toni View Post
    Just had a thought. Would it be a good idea on the dyno to run all the fans full bore when doing pulls?
    They will kick on when needed. Just like if you were sitting in traffic

  8. #18
    Forum User Not Verified
    Join Date
    Sep 2010
    Owner Since
    1994

    Location
    Seattle, WA
    Posts
    163
    Thanks
    12
    Thanked 39 Times in 22 Posts
    Properly designed fans would cool effectively to set temps and not require earlier activation to work. A stock VR4 with properly maintained cooling system and proper shrouds in place works perfectly with the intended fan settings. If not, the problem is not when the fans come on but something else.

    IOW - having them turn on earlier really isn't going to improve their effectiveness. And if it won't control or hold your engine temp as designed at 190-200 then it won't do any better coming on earlier. You have something else going on.

    A lot of some people's overheating problem is using the FAL fans and removed shroud or other applicable panels. Added to this is corroded (scaled) radiator or block or both. I've seen so many chase an overheating problem only to look in their radiator to see huge scale built up all over it from 20 years of neglect. Replace the radiator in that instance and 'voila, engine temps back to WNL as designed.

    I wouldn't want my V6 to run at 160F or fans to turn on then. That is way too cold for normal operating temperature on our engines. 170 is also too cold. You don't want your car to target that as your operating temp.

    Also, some claiming overheating is not actually overheating at all but normal upper operating ranges. I don't know why some think that 200F or thereabouts is overheating for a twin turbo V6. That's not overheating. It's where it should be and nothing to worry about under normal conditions.

  9. #19
    I lack color... verified

    Join Date
    Sep 2010
    Owner Since
    Aug 1998

    Posts
    3,589
    Thanks
    104
    Thanked 498 Times in 241 Posts
    Quote Originally Posted by cjbyron View Post
    I wouldn't want my V6 to run at 160F or fans to turn on then. That is way too cold for normal operating temperature on our engines. 170 is also too cold. You don't want your car to target that as your operating temp.
    Why?? (Genuinely curious about this)

    You're right about needing proper shrouds to keep air directed thru the cores, however,in my experience you'll still get over heating (my definition of over heating is 220degF) issues even with shrouds. The issue is caused when the IC itself becomes heat soaked (most people run poor quality inner coolers). In the past my fix for this was to turn on the AC and pull the AC clutch fuse so that the fans would kick on and draw more air thru the cores and cool them off faster. Now, it's no worry.
    Last edited by Greg E; 06-25-2013 at 04:34 PM.

  10. #20
    Forum User Not Verified
    Join Date
    Sep 2010
    Owner Since
    1994

    Location
    Seattle, WA
    Posts
    163
    Thanks
    12
    Thanked 39 Times in 22 Posts
    Because 160 is not the optimum temperature for the engine or even close. Too cold. Nothing mysterious on the why. I don't know if you are talking just about cars with a FMIC or stock or what. Either way, the normal operating temperature at which the tolerances and engine was designed for is in the 190Fs. I doubt you will ever keep the car in that 160 heat range anyway unless a really cold day out. At which time it would be a hindrance to drive around all the time so cold. But the point is that trying to maintain that cold (by turning on that fans so early) isn't going to gain anything. If it does anything it will be to overcool your engine below the proper operating temperature range. In the summer of course the engine will still probably override that low of a temp and only result in your fans running more often than they should.

    If your car performs and holds steady at around 190-200 with your fans on all the time that's great. I just don't see where it is advantageous to have them come on at such a low temp. I think differently I guess - if your fans cannot keep the car at the right operating temps as it was designed (short of a lot of big mods) then I'd look at a different cause or fix rather than trying to reprogram the fans to catch up sooner. IOW - the cooling system is probably in poor condition. The fans should be able to control the temps as listed in the chart and then engine staying within the designed operating range(s).

    As for the fix you mentioned by pulling a fuse - that is just going around the actual cause IMO. Not to mention what if you want AC on (because it is summertime and is when most cars complain about overheating).

    These cars never had overheating problems from the factory for all the years they were sold and the factory kept the same settings without any problems. It was only when they started getting 20 years old, poorly maintained, and modded with cheap parts that it started being an issue. First step in overheated car IMO is to check for scale build up (likely) and also look at what is being run for coolant (too much antifreeze reduces cooling).

    And as we both agree, get those radiator shrouds on there as well as the under car 'splash shield' which many cars do not have them on, especially the older ones that damaged the front AA and never replaced. All of those help direct the air properly and makes a tremendous difference in your cool system performance.

    Now higher mod'd cars that truly need a FMIC (many don't) is a different story since putting out an appreciable higher level of hp (say 500+) changes the game plan on factory cooling system design. For this thread I though you were mainly talking about stock or a little bit above like a few bolt on mods and under the 500ish range or racing applications. I maintain that the cooling system should match the engine needs not have to come on 30+ degrees colder than you want to maintain as your target operating temp. Yah know? Even on my race car I have the #1 fan set to wait until 185F until it comes on. Target temp is 192-198 which is just right IMO.

    Nice to have a little more control over the fans on/off no doubt. I just wouldn't look to that feature to work miracles in most overheating problems or plan for a 160 or 170 target temp as being a good plan.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering