Page 1 of 4 123 ... LastLast
Results 1 to 10 of 36

Thread: Disassembly: Radiator Fan Control

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    I lack color... verified

    Join Date
    Sep 2010
    Owner Since
    Aug 1998

    Posts
    3,589
    Thanks
    104
    Thanked 498 Times in 241 Posts

    Disassembly: Radiator Fan Control

    This was a puzzle piece that was extremely difficult to figure out. The format for this table in the code is different than most others as it's axis is static and it has no look up sub call.... Then it's reference is in a completely random area in the code with no direct references to coolant temp. Then, when I did finally figure all this out, the values in the table all seemed really high.

    So a few days after testing, I've finally verified I found the table that controls when the radiator fans kick on. This would also explain some of the overheating issues most people experience with any FMIC and the stock fans. IMHO The issue isn't so much their airflow as it is just the fact the fans don't kick on till such a high temp!

    Never fails, there's always one car in a 3/S cruise with a FMIC and stock fans that ends up overheating.... I've always fixed it by either hotwiring the fans to stay on all the time, or pulling the AC clutch fuse and having them drive around with the AC switched on. Solves the overheating issue.

    Opened up the EVO disassembly and went hunting for the same table. The logic was completely different but when I did finally find it, the values populated inside seemed more what I was expecting. Since the EVO came with a FMIC stock and you never hear of overheating issues, these values may help a LOT for you guys with a FMIC.



    The numbers you see in these tables are the temperature (degF) that trigger when each fan or fan state engages. The stock 99 VR4 table is up top and the EVO8 table is on the bottom. As you can see, the EVO table is MUCH MUCH more conservative. In fact, I'm running it in my 98 right now!

    Sorry 1G guys... Unless you wire in the fan controller setup from a 2G VR4, this isn't going to be very useful to you.

    2014 Exomotive Exocet - #101 "shocker yellow" - 1.8L 5-speed 3.9 torsen FMII powered
    Read more: http://mevowners.proboards.com/threa.../greg-pa-build

    99 Solano Black VR4 - #16 of 287 - ground up restoration - sold
    98 Pearl White VR4 #54 of 231 - 12.84@105mph - 93 Octane 12.50@107mph - 100 Octane with Chromed ECU - sold
    99 Pearl White VR4 #108 of 287 - 3RD place stock car class ECG 11 - Sold
    98 Black VR4: 100% stock - totalled by an Illegal 2-12-08
    95 White Stealth TT - 11.852 @ 118.25 - sold
    95 SSG Stealth TT - 11.981 @ 115.81mph - sold

    "I don't actually work on cars, I just talk about them on the internet."

  2. The Following 7 Users Say Thank You to Greg E For This Useful Post:


  3. #2
    Forum User Not Verified
    Join Date
    Sep 2010
    Owner Since
    2004

    Location
    Charles Town, WV
    Posts
    439
    Thanks
    52
    Thanked 14 Times in 12 Posts
    Perfect timing. I've got my car apart for a bunch of things, including an FMIC install. I've got the flashable ECU ready to go, so I'll gladly test this out on my 95. Great job!

  4. #3
    One fix at a time verified
    Join Date
    Sep 2010
    Owner Since
    2004

    Location
    Kansas
    Posts
    2,158
    Blog Entries
    1
    Thanks
    60
    Thanked 57 Times in 49 Posts
    Wow, that's very interesting. Do you have any idea if this would be affected if you had two driver's side fans installed? I still have both stock fans but bought another A/C fan to replace the passenger one plus it would free up more room too. I'm assuming that if it was wired up correctly it would make no difference. I will have to check into it though.

  5. #4
    I lack color... verified

    Join Date
    Sep 2010
    Owner Since
    Aug 1998

    Posts
    3,589
    Thanks
    104
    Thanked 498 Times in 241 Posts
    Quote Originally Posted by TurboSinceBirth View Post
    Wow, that's very interesting. Do you have any idea if this would be affected if you had two driver's side fans installed? I still have both stock fans but bought another A/C fan to replace the passenger one plus it would free up more room too. I'm assuming that if it was wired up correctly it would make no difference. I will have to check into it though.
    I would assume the same thing too. That would have to be a trial and error thing. Unfortunately, I ditched my spare fans a few months ago.

  6. #5
    Forum User Not Verified
    Join Date
    Sep 2010
    Owner Since
    2004

    Location
    Charles Town, WV
    Posts
    439
    Thanks
    52
    Thanked 14 Times in 12 Posts
    Quote Originally Posted by TurboSinceBirth View Post
    Wow, that's very interesting. Do you have any idea if this would be affected if you had two driver's side fans installed? I still have both stock fans but bought another A/C fan to replace the passenger one plus it would free up more room too. I'm assuming that if it was wired up correctly it would make no difference. I will have to check into it though.
    Do both fans have the same CFM rating? Must be some reason mitsu put a larger fan on one side, instead of making them all the same size.

  7. #6
    I lack color... verified

    Join Date
    Sep 2010
    Owner Since
    Aug 1998

    Posts
    3,589
    Thanks
    104
    Thanked 498 Times in 241 Posts
    Quote Originally Posted by jba3 View Post
    Do both fans have the same CFM rating? Must be some reason mitsu put a larger fan on one side, instead of making them all the same size.
    I imagine the larger one flows more air since it has a high and low speed setting.

  8. #7
    One fix at a time verified
    Join Date
    Sep 2010
    Owner Since
    2004

    Location
    Kansas
    Posts
    2,158
    Blog Entries
    1
    Thanks
    60
    Thanked 57 Times in 49 Posts
    Quote Originally Posted by jba3 View Post
    Do both fans have the same CFM rating? Must be some reason mitsu put a larger fan on one side, instead of making them all the same size.
    I don't know for sure all I know is that the OEM fans flow more cfm than any other fans on the market. Plenty of people have had no issues overheating switching to twin A/C fans. I plan to do it. Maybe it's just part of the factory shrouding but I do know they push quite a bit of air. The A/C fan will give me a little more room too.
    95 RT/TT Billet TD04s E70, DW1000cc injectors, ARC-2 with 92mm maf, 3SX fuel rail loop, hotwired Walbro 416/485, 3" FMIC, single small Krank vent, DR 3.5" downpipe and cat-back, DNP 02 housings, Hallman Pro MBC, BlackStealth LCDBC, AEM wideband, AEM oil pressure, Apexi S1 coilovers with SCE EVO 8/9 adapters, 3SX adjustable control arms, Spec 3+ clutch, Maximal solids/3SX poly motor mounts, Setrab custom SMOC, stock motor 127k miles, stock drivetrain.

  9. #8
    One fix at a time verified
    Join Date
    Sep 2010
    Owner Since
    2004

    Location
    Kansas
    Posts
    2,158
    Blog Entries
    1
    Thanks
    60
    Thanked 57 Times in 49 Posts
    I should have the flashed ECU installed here before too long and I have probably 4 or 5 A/C fans here so I'm sure I can figure it out.

  10. #9
    Thermal Engineer- Mmbr Since:8/2005 verified
    Join Date
    Sep 2010
    Owner Since
    6/2005

    Location
    Ann Arbor, MI
    Posts
    730
    Thanks
    277
    Thanked 128 Times in 98 Posts
    On a 1st gen you can simply swap the temperature sensor connectors at the bottom of the radiator.

    This makes it so that both fans come on whenever the coolant reaches the temperature threshold, as opposed to one coming on initially then both turning on later.

    I'd have to look in the shop manual for the actual numbers, but I think the first threshold was 190F and the other was 210F?

    '92 3000GT Base ATX converted to MTX - Parted Out
    '91 Stealth ES MTX - Fastest NA FWD at NG11 Drags - SOLD
    '91 Stealth RT/TT Check out my blog
    '10 Jetta TDI MTX - 6 speed: 50MPG Highway
    Rest In Peace, My Brother SGT. R. Evans Taylor: Apr 23 '83 - Oct 14 '11

  11. #10
    I lack color... verified

    Join Date
    Sep 2010
    Owner Since
    Aug 1998

    Posts
    3,589
    Thanks
    104
    Thanked 498 Times in 241 Posts
    I made a mistake. I wrote 75mph and its supposed to be 75kph or 50 mph. I'll revise in the final draft.

    The 99 manual verifies these numbers except it shows the 212 values as 221. I verified the 212 is the correct value.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering