Well another milestone was had today. Heads are on, new cam bolts, cams, GZP gears, lifters, and seals all in. NO BUSTED BOLTS WERE HAD!
Cleaned the pan up, and un-dented the dent. Need to give her a quick wash to get the remaining sealant out. That was a mission. I need to get a wire brush for the angle grinder next time!
Help them, for they know not that which they do not know!
CoopKill's Mistress Makeover Thread!
"Punk, Nutswinging, Small Time, Asshat, Monkey, Jerkoff, Loser that rides on other peoples accomplishments!" ..
Looks good Bill. I just did the same thing to my pan.
July 2014 COTMWe follow the earth. The earth follows the stars. The stars know their way and though the body dies. The stars will remain, like the waves of the sea and restless slate.
Man I am falling way behind in regards to whose build will be finished first. Supposedly there is some progress from the machine shop but we'll see.
1995 Dodge Stealth R/T Turbo
Mods: DR750s, BC Sportsman rods, Ross pistons, ACT HD 6 puck clutch, 5 speed transmission, 300M output shaft, Broomfield racing billet transfer case housings, Spectre air filter, GM 3.75" MAF w/translator, DN Pre-turbo pipes, Pampena/CX Racing dual core FMIC, M2 Performance turbo-back exhaust, Walbro 450lph E85 pump, SXPerformance fuel filter, stainless fuel feed lines, EK2 Mfg fuel rails, SXPerformance AFPR, 1000cc Bosch injectors, 99 VR4 replica ECU w/ Chrome for tuning, Kenne Bell Boost-a-Spark, Blitz SBC i-D boost controller, IPS oil cooler, Intrax springs on KYB GR2 struts, Enkei Kojin 18X9.5 +30, Nexen N3000s, 99 front end, carbon fiber steering wheel, Pioneer AVH-X2600BT, JL C2 6.5" and 6"x9" speakers, free 4 channel amp for subs (LOL), twin Alpine 10" type E subs.
Made 608whp/631wtrq on Pampena's dyno @ 31 psi.
The ebay link that you posted shows different lettering than this pic. Was you given options when you ordered such as letter colors and adding the Twin Turbo?Originally Posted by CoopKill
Another dance was had!
I need a disco ball on the porch, the next 7 days will be a party out there! Woot!
nice job man...
...install next weekend, or too soon to plan?
Great progress Bill! My vast collection of parts is almost complete and I'm about to start putting things together but I don't think there's any possibility to catch up with you or Steven. Maybe I can beat DK though
I dunno, if the rum keeps visiting steven you may be able to build yours twiceGreat progress Bill! My vast collection of parts is almost complete and I'm about to start putting things together but I don't think there's any possibility to catch up with you or Steven. Maybe I can beat DK though
if you cant fix it with a hammer...then you have an electrical problem
Well Jim, considering my block was dropped off at the shop BEFORE your motor was out of the car and it's STILL there, you might have yours assembled before I ever get mine back from the shop LOL.
That plenum looks nice!
I need to get a set of these.
Don't want to speak for him, but yes when I ordered the same mats I was given the option to customize, since they are made to order.
Edit: Coop, I've got a NA lower 1/2 laying around if you're interested.
Last edited by mb3000; 05-04-2013 at 04:07 PM.
Posting Permissions
|
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
|
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
|
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
|
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
View Profile
View Forum Posts
View Forum Threads
Show All Albums
Private Message
View Articles
View Blog Entries
Reply With Quote
Visit Homepage
Bookmarks