My DR1400 project started today

[IPD]

They wouldn't, these are 315's

André

actually mine are 285's...but that's not the point. i have 24mm offset & spacers, and yours STILL stick out wider than mine. by a LOT. it really looks like you have 12mm offset or something.

[Permanent grin]

+20

André

[green-lantern]

I´m fairly certain the red car is not built by cianci ? they have a precise copy of the kit ? FWIW
YATTCAR&#39;s Channel - YouTube <- built it

That is ridiculously low, it doesn't serve any purpose other than cruising the hood and bumping some jams. A true handling package to allow a bit of travel would be great.

[mb7050]

Sorry to derail your thread a bit but I likes this widebody.

[green-lantern]

I like the widebody (better with 18-19's instead of 20's) but the graphics are tacky.

[Permanent grin]

That is ridiculously low, it doesn't serve any purpose other than cruising the hood and bumping some jams. A true handling package to allow a bit of travel would be great.

I won't be running low for hood cruising, remember this will be a dd that I take fishing etc.

My offsets were calculated using the stock sizing my car came with, 235/45/17 8.5" +46 ET for the 1st wheel and 315/30/18 10.5" +20 ET for wheel 2 on this site

You will see I tried to keep the inside of the wheel and tire pretty close inboard but hopefully not rubbing. Sure there is a lot of fender work to be done, but as I see it, that is the variable in the equation. Most other things can't be moved much, like inner arches and struts.

but I likes this widebody.

I do too but I'm not wholly convinced by the leading edge of the rear wing where it meets the skirt or the way the front bumper has been integrated into the front flare.

André

[IPD]

Sorry to derail your thread a bit but I likes this widebody.

promising, but i see a bunch of angles disguised by tacky graphics.

[mehrshadvr4]

the rear bumper and quarter panel of that wide body is so damn ugly. the red one is something else. get pit road m wide body kit. they look much cleaner or you can just flare the fenders like the pit road m.

[green-lantern]

the rear of that wide body is so damn ugly. get pit road m wide body hit. looks much cleaner. or you can just flare the fenders like the pit road m.

I think that is a good look but some of the rest of the car I'm not big on.

[MR2]

this is 19x10+42 on my car






not much you can do about it now...let us know how it goes though!

I find even with this offset the car gets pulled a fair bit more around by the imperfections in the road