Current Car:
2011 Chevrolet Corvette GrandSport
Cars Owned:
1992 Dodge Stealth RT (sold)
1992 Mitsubishi 3000GT VR4 #1 (parted)
1992 Mitsubishi 3000GT VR4 #2 (sold)
1993 Mitsubishi 3000GT VR4 #1 (KIA)
1993 Mitsubishi 3000GT VR4 #2 (sold)
1994 Mitsubishi 3000GT VR4 (sold)
1994 Mitsubishi 3000GT Base - awd/atx (sold)
1997 Mitsubishi 3000gt VR4 (sold)
2006 Pontiac GTO (sold/traded)
2008 Chevrolet Corvette 3LT (z51)
Oh yeah, I agree, the 6 speeds need it for sure. Didn't ukyo (from 3si) split his open at BPU levels years ago?
The drivetrain in a 25 spline 5 speed is quite stout as long as you don't split the t-case... For the longest time I had a brace that would allow the t-case the break but save the bell housing. The t-case never broke until I welded the CD -- then everything broke LOL ... That's why I agreed with his initial post with an exception for the 6 speeds.
Remember Kris (Mitsuman) splitting his NEW 6spd the first time he launched his car? There was a pic of his 99 with a trail of fluid in front of it. I loved my 5spd.. I did an accidental 5->2 shift once coming off the highway when I was a newb...yea she wasn't happy and I blew a hole in the side, but she got me home with almost no fluid left..
Dunno, but you know that sound a 12 speed bike makes when it is catching a gear? clack clack clack clack PING! Yea, my trans made that noise, and I had a plum of white smoke and the smell of burnt clutch. The cloud was so thick that guy at the light next to me gave a "Holy Shit!" look when I pulled up next to him. I suppose that is when the fluid came into contact with my exhaust?
Thanks for the clarification (sans the personal insults - which I assume were directed at the other guy).
What do you mean by slipping the clutch and allowing for wheel spin. Coming from the FWD world this logic seems backwards to me. The more you slip the clutch - the less wheel spin you have. Whereas the less you slip the clutch the more wheelspin you have.
Is the goal to combine the two of these and avoid wheel hop? Is wheel hop almost eliminated with solid motor mounts - in my experience (FWD) it is.
'92 3000GT Base ATX converted to MTX - Parted Out
'91 Stealth ES MTX - Fastest NA FWD at NG11 Drags - SOLD
'91 Stealth RT/TT Check out my blog
'10 Jetta TDI MTX - 6 speed: 50MPG Highway
Rest In Peace, My Brother SGT. R. Evans Taylor: Apr 23 '83 - Oct 14 '11
As has been discussed, the goal is simply to reduce the impact loading on the drive train. As I'm sure you know, predicting actual stresses induced by an impact is pretty hand-wavey, but the point is clear... ~2 to ~8 times the actual applied load. Wheel hop is nothing more than a relatively high frequency impact loading scenario. Clean wheel spin and riding the clutch out of the hole are simply alternative ways to reduce the impact. Traction will determine which technique you use. Wrinkle wall slicks and pre-loading the drivetrain are additional ways to reduce shock.
My drag radials were just sticky enough to bounce like crazy at the track.
Try to wrap your head around the shock loading that takes place inside the drivetrain due to the behavior of the stock center differential. Compare that to a welded center diff. I've got my own thoughts on the subject but I may be wrong, and I don't want to bias anyone that takes the time to think through it.
'93 VR4 | 10.57 @ 135 on C16 | 11.29 @ 125 on 93 | ~3275 lbs
|
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
|
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
|
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
|
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
Bookmarks