What did you do today to your 3/S?

**j2k4** · 07-02-2011, 01:18 PM

Originally Posted by 2fnloud

But to you have the 96 or 96 replica wing?

Well, no, but.

Stock 1G -but I'm willing to spend.

**2fnloud** · 07-02-2011, 01:33 PM

Originally Posted by j2k4

Well, no, but.

Stock 1G -but I'm willing to spend.

Spend away:

96 wing

**93STLTH** · 07-02-2011, 01:41 PM

I had to replace the idler pulley on my car after the trip back from the NG. Those damn things just don't like water hitting them. Anyway, while I had the drivers side wheel off, I decided the calipers looked a bit tired. Plus, I never really liked the red Carbotech pads with my blue calipers. So, it went from this...

to this...

Now, I have to get my ass back to the garage and do the other 3 wheels.

**mb3000** · 07-02-2011, 02:17 PM

Originally Posted by MADMarc

lol I was going to write all over it but no time...no time...They are a tight fit but it's amazing how almost perfect they are for those damn cables. If only they were red :P I loosened them up with some WD before tossing them on but don't think it will make too much of a difference. My solid bushings were binding up so I left one stock and the other solid. Can't wait to give these guys a go

I couldn't get my 608zz's to fit no-matter how hard I tried. I finally went with 3sx and they fit like a glove.

**green-lantern** · 07-02-2011, 02:20 PM

Originally Posted by shmoo

AWEsomee! and good meeting ya man, love the car.

_isiah

Thanks, It was great meeting and hanging out with you. Torch is pretty damn cool too. You're not nearly as weird as I thought you would be. lol

Originally Posted by 93STLTH

I had to replace the idler pulley on my car after the trip back from the NG. Those damn things just don't like water hitting them. Anyway, while I had the drivers side wheel off, I decided the calipers looked a bit tired. Plus, I never really liked the red Carbotech pads with my blue calipers. So, it went from this...

to this...

Now, I have to get my ass back to the garage and do the other 3 wheels.

Cool, glad to see you did that. I got to admit it was the one thing I didn't like about the car but I still voted for you.

Everything else is practically perfect so they stuck out a bit.

**Alex3000gt** · 07-02-2011, 02:31 PM

Originally Posted by shmoo

^^aw, i'll miss her. she brought your jackstands to the meet.

today i started cutting cardboard to make myself a slightly smaller big ass splitter. i'll go ahead and apologize for the finished product now.

_isiah

Glad I could help!

**MADMarc** · 07-02-2011, 02:56 PM

Originally Posted by mb3000

I couldn't get my 608zz's to fit no-matter how hard I tried. I finally went with 3sx and they fit like a glove.

Those bearings are in there tight. I couldn't press them in with my hands or channel locks so I got a block of wood and a rubber mallet. Some tapping later and VOILA!