Sarcasm much? I could also put two self tapping screw into the original bracket where the bolt holes are on the clone ECU.
Sarcasm much? I could also put two self tapping screw into the original bracket where the bolt holes are on the clone ECU.
No sarcasm Steve, I was being truthful.
I thought about using those holes too, but that would only secure that end.
Bob.
95 Caracus Red Spyder VR4 (sold 6/12/21 )
Cianci FG Viper Hood/Aerocatch Pins
Quad Carbon Fiber Tipped Borla Catback
Stock 18" 6 Spoke Chromies
K&N FIPK
Indiglo Gauges
JimVR4's Remote Start/Top Op Computer
92 Wheat Beige Metallic Stealth TT (sold 6/14/20)
OhioSpyderman Short Shifter (in both!!!)
SBC-iD Boost Controller (in both!!!)
Oldest son - 94 Danube Blue VR4 (sold 10/19)
Middle son - 93 Panama Green VR4
Installed the new Directed smart start module that was required due to Directed switching carriers.
Also this bundle of wires used to be below the OBDII port bracket in the way:
Added the need things to protect the wires from the sharp metal edge.
Then group up the alarm wires with cloth TESA tape, leaving the AUX channels easily accessible:
![]()
Finally got some time to mess with the new car. Swapping everything from the green car to the white one. Going to try to get my new treadstone unit mounted tomorrow so I know where to start trimming the bumper for fitment. Also wish I had the rest of the true black interior.
24300977_10215229951164287_9169819695424546010_n.jpg
24294084_10215229952684325_7776015982241424597_n.jpg
24231749_10215229953164337_4705672866134786831_n.jpg
24176976_10215229953804353_5262039868083196293_n.jpg
24176826_10215229954244364_4718161712682428319_n.jpg
Made some L brackets. The mounting holes I had them weld on lined up perfectly with the 2 upper inner crash bar holes. Just need to trim the bumper for max airflow and it's in for good.
24785410_10215238605540641_6656697025778003125_o.jpg
Never, ever buy headlights from BriteASSLED. I had a pair in my VX, one failed after about 2 years. The problem is, you can't get hold of them. There's no response to calls; their voicemail is full. There's no response to filling out a form on their website. And they don't list parts, so buying 1 headlight or 1 module for them...is a no-go.
Stay away.
My middle son and I (I was the tool bitch) did a 60K on my 92TT. He made it look easy
Got new hood struts today for the TT, and will install tomorrow (hood will NOT stay up in the cold, at all).
Hoping the car will last for another 60K(It's close to 200K on the odometer right now!)
Bob.
What did I do with my 3S? Waved goodbye to the SL
Still have the Stealth.
Received my steering wheel that I sent out for custom work:
Alacantara suede, yellow stitching, and a steering dial.
As someone who was redone a couple wheels, that looks very nice.
|
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
|
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
|
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
|
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
Bookmarks