Page 2 of 8 FirstFirst 1234 ... LastLast
Results 11 to 20 of 74

Thread: Turbo/Efficiency Discussion

  1. #11
    VR-3747 :D Not Verified
    Join Date
    Sep 2010
    Owner Since
    2008

    Location
    Dayton Ohio
    Posts
    1,792
    Blog Entries
    1
    Thanks
    19
    Thanked 123 Times in 86 Posts
    Good input fellas, thanks! I have definitely considered getting somewhere like Turbo Lab to go through the 20G's and do them up good for me. Would be relatively affordable.

    NOM's - There is a flaw in that thought though. I bought the stuff I have when I had a lot less financial freedom. ie college. I have been working for ~ 2 years in the real world now, and saving a good chunk of that. This time round I want to get the setup where it always shoulda been. Plus, why would maxxing the current setup change the fact that I know it won't land me where I want to be when it's all said and done. I'll be in the same spot, just with a faster car that I want more faster!

    But to answer your question, no, the setup isn't maxxed. I have some leaks and other various annoying issues that need to get fixed (hence pulling the engine) and I have the parts to do all of that. I can't swap turbos with the engine in the car, so if I'm going to have it out, I might as well get them how I want them. And to be clear, I have tried to pull the rear turbo with the engine in... there isn't enough room. My rear valve cover was seeping and I wanted to fix it... found out I gotta pull the engine to fix something so silly
    rise and rise again until lambs become lions

  2. #12
    VR-3747 :D Not Verified
    Join Date
    Sep 2010
    Owner Since
    2008

    Location
    Dayton Ohio
    Posts
    1,792
    Blog Entries
    1
    Thanks
    19
    Thanked 123 Times in 86 Posts
    As was said - there are a lot of variations on the turbo's. Below is a pic of my 20G's (turbo on the right, obviously).



    Can anyone give me more info on them? The best I can find is a TD05 turbine, TD06 compressor cover... like 45 lb/min?


    Keeping the 20G's is preferred for fitment of things. I have a custom dual 3" exhaust and no welder currently haha. So if things don't line up perfect, I could be screwed.
    Last edited by futurevr4man; 03-02-2015 at 08:50 PM.

  3. #13
    Member verified
    Join Date
    Sep 2012
    Owner Since
    2010

    Location
    Decatur, TN
    Posts
    1,671
    Blog Entries
    7
    Thanks
    57
    Thanked 71 Times in 60 Posts
    If chasing the most power you can, might as well go external dumps, especially with the design of the manifolds you have which dumps the exhaust right at the turbine wheel. That alone should make a noticeable difference, finding a welder to do it shouldn't be terrible. Obviously stops the poor arrangement there, with the added benefit of making the exhaust significantly less restrictive for the turbos. (assuming you haven't already, no idea)

    As far as turbo, have you considered a pair of FP Greens/Reds? Flow in the mid to high 50lb/min rate (I think 20G is supposed to be about 42-43lb/min) and the DSM guys seem to love them. I doubt you'd want to go bigger than the Green (as it would obviously delay spool more going up to a red or a black which spool on a DSM at about 5k with more displacement than you have pushing each.)
    Mods: 2g 3k body conversion, 2g Brake upgrade, Rota P45R rims
    Projects: Interior sound deadening, 14Bs, forged bottom end, custom radiator and sound mounts

  4. #14
    Forum User
    Join Date
    Sep 2010
    Owner Since
    2002

    Location
    Delaware
    Posts
    990
    Thanks
    94
    Thanked 85 Times in 61 Posts
    throw everything away or sell it and buy a DR1200 setup. They made as much torque as HP on a 3.45L engine and still cracked 4 figures when wound way up.

    Jason

    Silverstone Metallic 94 R2 FD and a Silver 2015 F250 Lariat Ultimate CCSB 6.7PSD
    Sold: Black 99 VR4 and two Pearl White 93 VR4's. Just say NO to FMIC's

  5. #15
    VR-3747 :D Not Verified
    Join Date
    Sep 2010
    Owner Since
    2008

    Location
    Dayton Ohio
    Posts
    1,792
    Blog Entries
    1
    Thanks
    19
    Thanked 123 Times in 86 Posts
    I really would love to do that, Jason. I just can't justify that much money. Especially when what I have isn't broken. I don't want to break records, just have a fun car.

    Does anyone think there is anything to be gained by streamlining my setup though? The 2.5" outlets going to 2.5" pipes, combining to 3.5" (mathematically it's nearly perfect) to the 3.5" TB/intake mani? I am hoping to notice something from that... definitely from the bigger TB...

  6. #16
    Member verified
    Join Date
    Sep 2012
    Owner Since
    2010

    Location
    Decatur, TN
    Posts
    1,671
    Blog Entries
    7
    Thanks
    57
    Thanked 71 Times in 60 Posts
    Quote Originally Posted by futurevr4man View Post
    I really would love to do that, Jason. I just can't justify that much money. Especially when what I have isn't broken. I don't want to break records, just have a fun car.

    Does anyone think there is anything to be gained by streamlining my setup though? The 2.5" outlets going to 2.5" pipes, combining to 3.5" (mathematically it's nearly perfect) to the 3.5" TB/intake mani? I am hoping to notice something from that... definitely from the bigger TB...
    Have you ever done the math to determine your reynolds number for the piping? At that kind of diameter, I'm going to assume that you're probably nowhere near turbulent, but haven't looked.

    Beyond that, did you delete the ABS? Ever consider running your piping through there to give it as straight of a shot as you can towards the throttle body? May be gains to be had by upgrading the IC core to something more efficient as well, but not sure how big of a gain you may see going up to a core with better FPI.

    Honestly with what you have, I think fixing your exhaust leak issues alone should make a big difference, beyond that you're mostly getting into maximizing the efficiency of your set up (which gets expensive when you don't own a welder) or just upgrading to bigger turbos (which generally means more lag as well.) Not sure there are any easy answers here.

  7. #17
    Forum User
    Join Date
    Sep 2010
    Owner Since
    2002

    Location
    Delaware
    Posts
    990
    Thanks
    94
    Thanked 85 Times in 61 Posts
    Then just make your setup work as best it can and re evaluate if thats not gonna work for you.

    Jason

  8. #18
    Forum User verified
    Join Date
    Sep 2010
    Owner Since
    August 2010

    Location
    Chicago
    Posts
    1,494
    Thanks
    46
    Thanked 57 Times in 46 Posts
    I must have missed it, but how much power are you making now with how much boost and what kind of fuel?

    Secondly, how much power are you wanting to make?

    From my own testing, I gained nothing from matching my TB size to IC cold side pipe (3") along with adding a much larger intake plenum @500whp. Ive since made changes (switching to a MAFT setup) and at the power level I'm making I still don't think its justified really.

    Having to pull the motor for something so miniscule would annoy the hell out of me...to the point where I would completely redo my whole setup...if it was my car of course.. The standard run of the mill evo16g's have made close to 700whp on 3.5 motors with plenty more to go without trying too hard as I'm sure youre aware..plus they can be removed in less than an hour(per turbo)
    Last edited by NOMIEZVR4; 03-03-2015 at 12:13 AM.
    95 TD05 16G VR-4---540whp@24psi
    34XXlbs..

  9. #19
    I don't bite
    Join Date
    Sep 2010
    Owner Since
    2001

    Location
    Southern IN
    Posts
    1,996
    Thanks
    59
    Thanked 98 Times in 80 Posts
    20gs should have a td06 turbine, especially on a bigger engine. Get a td06h4 wheel for them.

    Oh and 5000 for full boost on a 3.7....... sounds like something is wrong.
    1992 Kilder Green VR4 - First 4G swap in a 3S. 2.0, auto, awd. 9.65 at 143mph. Now LS swapped. 8.52 at 162.

  10. #20
    Forum User verified
    Join Date
    Sep 2010
    Owner Since
    August 2010

    Location
    Chicago
    Posts
    1,494
    Thanks
    46
    Thanked 57 Times in 46 Posts
    Quote Originally Posted by familyMAN View Post
    20gs should have a td06 turbine, especially on a bigger engine. Get a td06h4 wheel for them.

    Oh and 5000 for full boost on a 3.7....... sounds like something is wrong.
    I was thinking that too but figured with 20g's a bit more lag would be expected.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering