For those that are not following the CoopKill chrome thread I am all in pieces again. Checked everything looking for mistakes, and issues, and it looks like the culprit could be the preset cam gears. They are getting swapped back to oem hopefully tomorrow night. If not maybe Sunday. Not lost hope yet.
Current state of affairs...
Help them, for they know not that which they do not know!
CoopKill's Mistress Makeover Thread!
"Punk, Nutswinging, Small Time, Asshat, Monkey, Jerkoff, Loser that rides on other peoples accomplishments!" ..
So, for those not following. What issues have the preset gears presented?
July 2014 COTMWe follow the earth. The earth follows the stars. The stars know their way and though the body dies. The stars will remain, like the waves of the sea and restless slate.
They apparently do not like my setup, and the cam overlap may be causing my afr/loping issue. Will see.
Innnnnnnnnnnnnnnnnnnnnnnnnteresting
Did you have the heads milled? If so, how much? It might have advanced or retarded the cams. And since you have them set differently than stock at +1 -3, it could be too awkward of a set up to run correctly with all of the timing adjustments combined.
Last edited by Djmba; 01-21-2014 at 10:19 PM.
Yeah, 005. Your statement seems to be the consensus. Machine shop did not provide the actual amount milled in writing. Only a verbal indication. So could be bullshit, and more was taken.
Sent from the Man Cave!
*\( ^o^ )/*
Sucks that it's really only a hypothesis you have to do a timing job to figure out if it is actually the problem.
I've had my heads milled multiple times. The machine shop never provided amount taken off and I never asked because it slipped my head. My cams don't line up 100% perfectly but it runs without a lope and pulls hard. Lol. It must be okay.
Just can't win huh?
Seems like I heard something negative about the preset gears. It may have been issues like this, but not sure. I was tempted at a group buy a while back, but didn't jump on it. I liked the simplicity of it
__________________________________________________
We will soon see. It will not beat me!
Sent from the Man Cave!
*\( ^o^ )/*
Oem cams back in.
One issue found. The tb tensioner was fully collapsed. Unsure if the is common? The belt was loose big time.
Looks like I will be making another order...
Sent from the Man Cave!
*\( ^o^ )/*
Posting Permissions
|
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
|
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
|
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
|
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
View Profile
View Forum Posts
View Forum Threads
Show All Albums
Private Message
View Articles
View Blog Entries
Reply With Quote
Bookmarks