2013 Yamaha R1
2003 Honda CBR600RR
Evo X 2008
Blue 1995 3000GT NA
*Performance: Test pipe, OBX headers, Custom Single Exhaust, TT Plenum, TT fuel pump, 272/272 cams, VR4 2nd gen heads, 3rd gen lifters, Under drive pulley, Slotted Drilled Rotors, Rear and front solid motor mount, Intake 11.5inch Spectre air filter.
*Weight: 2930lb
*Electronics: AEM UEGO wideband, Evoscan, 99 Flashable ECU, Tactrix 2.0.
WHP~231 WTQ~207 VDR Dyno http://i70.photobucket.com/albums/i1...ps03a88b79.jpg
0. Gray Haze
1. Greg E
2. Jesters
3. BucknVr4
4. Forest Gump
5. NOMIEZVR4
6. Kx1984
7. green-lantern
8. ChargerX3
9. futurevr4man
10. awdonly
11. Zybrainn
12. kywhitelightning
13. Keyan
14. J-Groove
15. mjannusch
16. HLxDrummer
17. Disrupter
18. Emilie@GZP
19. TurboSinceBirth
20. CoopKill
21. Dyter
22. ver fer
23. tfw a-ok
24. iceorphen
25. pensky3thousand
26. Nater3kgtVR4
27. Toni
28. Stealth_RT
29. arm0red1
30. striker2
31. Whaleshark
32. DK77
33. TUFFTR
34. 2fnloud
35. jazz9
36. elyria_boy
37. JimVR4
38. VR4GUY
39. TwIzTeD_3kGt
40. ICPREY
41. The Linchpin
42. Hellssephiroth
43. AutoChef
44. Oskar
45. Hotflare
46. aaronatstate
47. Smartaxel
48. 75blackray
49. Saiteiman
50. Anyonebutme
51. Sergechronos
52. surfersamu
53. D.I.P.
53.beasting
I'm running cloned ecu with v2 I've played around with it got my car running smooth with maft in blow thru, my 92 vr4 has never ran better
Greg if you ever need a beta tester that can flash and report promptly let me know![]()
0. Gray Haze
1. Greg E
2. Jesters
3. BucknVr4
4. Forest Gump
5. NOMIEZVR4
6. Kx1984
7. green-lantern
8. ChargerX3
9. futurevr4man
10. awdonly
11. Zybrainn
12. kywhitelightning
13. Keyan
14. J-Groove
15. mjannusch
16. HLxDrummer
17. Disrupter
18. Emilie@GZP
19. TurboSinceBirth
20. CoopKill
21. Dyter
22. ver fer
23. tfw a-ok
24. iceorphen
25. pensky3thousand
26. Nater3kgtVR4
27. Toni
28. Stealth_RT
29. arm0red1
30. striker2
31. Whaleshark
32. DK77
33. TUFFTR
34. 2fnloud
35. jazz9
36. elyria_boy
37. JimVR4
38. VR4GUY
39. TwIzTeD_3kGt
40. ICPREY
41. The Linchpin
42. Hellssephiroth
43. AutoChef
44. Oskar
45. Hotflare
46. aaronatstate
47. Smartaxel
48. 75blackray
49. Saiteiman
50. Anyonebutme
51. Sergechronos
52. surfersamu
53. D.I.P.
53.beasting
54. LeRoyDL
Cloned v2.

I don't know if you ever figured this out but if I would have known your car is a 95 FWD I would have posted. You don't have a speed sensor in your car. Your speedo is cable driven. The ECU doesn't know your speed and that input just sits at 0mph all the time. This is why LC doesn't work for you.
2014 Exomotive Exocet - #101 "shocker yellow" - 1.8L 5-speed 3.9 torsen FMII powered
Read more: http://mevowners.proboards.com/threa.../greg-pa-build
99 Solano Black VR4 - #16 of 287 - ground up restoration - sold
98 Pearl White VR4 #54 of 231 - 12.84@105mph - 93 Octane 12.50@107mph - 100 Octane with Chromed ECU - sold
99 Pearl White VR4 #108 of 287 - 3RD place stock car class ECG 11 - Sold
98 Black VR4: 100% stock - totalled by an Illegal 2-12-08
95 White Stealth TT - 11.852 @ 118.25 - sold
95 SSG Stealth TT - 11.981 @ 115.81mph - sold
"I don't actually work on cars, I just talk about them on the internet."
yes.. i did today i was reviewing electrical diagrams.. went to my car and traced my speedo sensor wire... is not going to the ecu is going to speedometer..
thank u for claryifing it for me!
I was thinking of just taping that speed sensor wire and send the signal to pin 80(speed sensor input).
Sent from my iPhone using Tapatalk
Greg I have an idea, why not code something for the na guys to use launch by having be clutch switch and Tps activated like NLS ?
Smart man, I didn't even think about the nlts as launch control, now it's a double purpose mod![]()
If your car has a speed sensor (and not a cable driven speedometer), yes you can run that to the speed sensor input on the ECU and all should be good. The only thing that you have to check is that the spped sensor is the same between the different versions.
I would think that even if the pulse amount is different, this should not matter as you only need to see greater than 5 mph to turn off launch control rev limit . . . as long as the difference in real speed and percieved speed by the ECU is not too great (like more than 5 or 10 mph) you should be ok.
- Brett
www.ClonedECU.com
The home of the Original Clone and Clone2 ECU!
More Plug n' Drive and less Plug n' Fail like the others!
Remember, if it's not a Clone, it's just a copy!
Get Chromed!
Donate Now and receive a coupon code for the amount of your donation (up to $50.00 US) which you can apply at check out for a Clone2 ECU, Plug n’ Play Harness, or Clone2 Plug n’ Play Package!!
1999 3000GT VR4
Glacier Pearl White
Yeah it's stock . . . trust me
How To Contact Me:
eMail: brett_farnam@yahoo.com
US3S/3SGTO: 99 vr4
3SI: bfarnam
|
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
|
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
|
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
|
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
Bookmarks