Rebirth of my 94 R/TT - Single Turbo

**Boostaddict** · 10-12-2010, 10:18 PM

Originally Posted by vr4_rider

I bought mine from racepartssolution. I paid 15-16 bucks for it.

Mine was stamped as well, but I wonder why boostaddict didn't like his? Was it a mating issue? Mine mated perfectly.

I don't like it because its not stainless even though it was advertised as so. The stamping wasn't up to my quality standards, and I like nice beefy machined flanges not flimsy thin gauge steel.

**neveret** · 10-12-2010, 10:28 PM

I'm guessing your setup should look something like this when you're done. I'm using similar headers, I believe, but I had to do alot of fab/re-engineering to make them work with everything else. I did all the downpipe/wastegate and intake fab work myself though. Your power goals are similar to mine, but I'm using a gt42 with a homemade spool valve built into the crossover pipe. My car's slated to get tuned later this week so I can probably give you some feedback on how the injectors will work out.

**vr4_rider** · 10-12-2010, 11:44 PM

Originally Posted by Boostaddict

I don't like it because its not stainless even though it was advertised as so. The stamping wasn't up to my quality standards, and I like nice beefy machined flanges not flimsy thin gauge steel.

Hmmm, how long ago did you buy it? I bought mine about a month ago.

Maybe mine is different than yours. I'm pretty particular on what a good quality part is, and it might be that I am satisfied because they used somethine else.

**terrets** · 10-13-2010, 01:46 AM

Oooooooohhh I like that neveret ^^^. Wheres your fuse box? haha I know I asked someone else this question...might have been you.

**neveret** · 10-13-2010, 08:12 PM

Originally Posted by terrets

Oooooooohhh I like that neveret ^^^. Wheres your fuse box? haha I know I asked someone else this question...might have been you.

It's mounted sideways against the frame under the air filter.

**terrets** · 10-14-2010, 01:12 AM

Originally Posted by neveret

It's mounted sideways against the frame under the air filter.

Thanks

. Im trying to get ideas to clean up my bay.

**TooFast4Radar** · 03-05-2011, 06:16 PM

I'm going to St. Thomas this coming week and should have my block back from the machine shop assembled and ready to go. The heads are getting fitted for the over-sized valves and I'm getting the heads, lower intake, and this port matched:

**Boomer3000** · 03-05-2011, 06:36 PM

Damn good looking stuff man!!!... You need to hook up with the stl crew for a night out soon!! Shit my 21st is coming up.(Better buy me a damn drink!!!) My TT should be done being built by then!!!