Why not plug the ports and baffle opening with non hardening modelers clay?
Why not plug the ports and baffle opening with non hardening modelers clay?

2014 Exomotive Exocet - #101 "shocker yellow" - 1.8L 5-speed 3.9 torsen FMII powered
Read more: http://mevowners.proboards.com/threa.../greg-pa-build
99 Solano Black VR4 - #16 of 287 - ground up restoration - sold
98 Pearl White VR4 #54 of 231 - 12.84@105mph - 93 Octane 12.50@107mph - 100 Octane with Chromed ECU - sold
99 Pearl White VR4 #108 of 287 - 3RD place stock car class ECG 11 - Sold
98 Black VR4: 100% stock - totalled by an Illegal 2-12-08
95 White Stealth TT - 11.852 @ 118.25 - sold
95 SSG Stealth TT - 11.981 @ 115.81mph - sold
"I don't actually work on cars, I just talk about them on the internet."
I went to the machine shop that did my heads / block yesterday and they told me they just finished a stealth TT full rebuild. The story was the owner had the heads done at a different shop that failed to properly remove the media after blasting them. You know the rest. The original shop took $5K for the head work and the new shop only took $4500 for the complete rebuild.
GTO-TT, PTE 1200's, M20, Emanage Ultimate, OS Geiken R3C,
TD04-16g`s, Maf-t. 13g`s 12.4@115mph / 16g`s 12.5@117mph.
Gasoline also works very well for removing that burned in oil
Mods: 2g 3k body conversion, 2g Brake upgrade, Rota P45R rims
Projects: Interior sound deadening, 14Bs, forged bottom end, custom radiator and sound mounts

Just to support Iceland's post. Here is the one I am working on. Pulled this off a car with 110k on the ODO. Ran it thorugh a quick degreaser wash without scrubbing it down so you could see the heavy deposits.
Burnt on oil
Here is with the baffles removed. You can see the sludge buildup and how heavily it is built up. Now just imagine running this through a blasting cabinet all of the medium that would get stuck in there. It would be clumps of oily sandy mess....
![]()
91 R/T TT
Mods: RC 550s, Stillen Downpipe, Stillen Cross-Drilled Rotors, HKS Exhaust, HKS VPC, HKS EBC, HKS Turbo Timber, HKS Twin Power, HKS SSQV BOV, HKS SMIC, HKS Fuel Pump, Wiseco Pistons, 3SX Rods, Ferrera SS Valves, 3rd Gen Lifters, 15G Turbos, Centerforce Dual Friction Clutch, B&M FMOC, Unorthodox Racing Underdrive Pulley, EGR blockoff.

They were not rivets, Just the aluminum crushed down to secure the plate. Going to drill and tap then for screws.
|
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
|
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
|
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
|
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
Bookmarks