Ok
I'm feeling kinda sick.
Im going to take the baffling in the valve covers off and clean behind it tomorow , hopefully refitting it isnt impossible...
It's all off the car now and it's getting a good going over.
Exactly what I do. It works really well IMO. I just have a $15 siphon gun from Amazon and a 5 gallon bucket with soda. My compressor is plenty large. My only issue is continuously feeding the soda. It likes to create pockets so you need to re-position the pick-up tube every now and then.
91 R/T TT
Mods: RC 550s, Stillen Downpipe, Stillen Cross-Drilled Rotors, HKS Exhaust, HKS VPC, HKS EBC, HKS Turbo Timber, HKS Twin Power, HKS SSQV BOV, HKS SMIC, HKS Fuel Pump, Wiseco Pistons, 3SX Rods, Ferrera SS Valves, 3rd Gen Lifters, 15G Turbos, Centerforce Dual Friction Clutch, B&M FMOC, Unorthodox Racing Underdrive Pulley, EGR blockoff.

I learned through a bad oil analysis that I had way to much silicone in my engine which came from recently blasting and painting my valve cover. I was too quick in cleaning it out and didn't get all the medium out from under the baffles. I was lucky that I didn't get any large particles in it and that I changed the oil soon after it was blasted.
I am not much more cautious when running parts that make contact with oil through my blaster. The last oil part I ran though was an oil filter housing. I removed and replaced the relief valve on it and I must have scrubbed it down 10 times after blasting it.
The next time I do a valve cover, the baffles will be removed as I know that is were the medium was getting in.
|
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
|
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
|
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
|
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
Bookmarks