What did you do today to your 3/S?

[anyonebutme]

I half assed covered my car with an old pop-up canopy top to keep water out of it. Will start disassembly this weekend

[TwIzTeD_3kGt]

Re-gapped my new copper plugs down to .024" to try and eliminate what I thought was spark blowout, but then I found this:



So I don't know if it was blowout or the one cylinder being down under boost because of that large gap. Either way, problem solved. Boost is back up to 17psi, and she scoots.

[stealthee]

I put a few parts in the Stealth. I need to prep it for its drive to its and my new home.

I took the majority of my 3s parts over to the new house already. Grand Prix is filthy now,

[EvanH]

Went to mail my ignition box today,to get fixed.....found out it will be cheaper to buy a new one....... I hate decisions.

[2fnloud]

Been cutting spring perches of my new struts, grinding machine bushings to clear tires, replaced some of the C/F dash kit that was cut wrong, and finally put the new tags on the license plate and she is road legal now.

[Blackmount]

Doin work Steve!

[2fnloud]

Doin work Steve!

Doing something, I discovered that I will not have tire clearance with the spring seat all the way down, ground the machine bushing that the threaded sleeve sits on to make more room.

Only after the alinement will we learn if there is anything gained by cutting off the original spring perch to have lower ride height settings.

[IcelandGTO]

In the process of replacing the synchros and doing some maintainence on my engine.

[futurevr4man]

^^ its sad how much easier it is to just pull the whole thing rather than fight with it while its in the bay haha

[TT4ME]

Got my turbo back. It is pretty.