Jump the connector on the rheostat to give full power to the stock lights and then wire the rheostat itself up to +12v to control the Stack`s?.
Jump the connector on the rheostat to give full power to the stock lights and then wire the rheostat itself up to +12v to control the Stack`s?.
GTO-TT, PTE 1200's, M20, Emanage Ultimate, OS Geiken R3C,
TD04-16g`s, Maf-t. 13g`s 12.4@115mph / 16g`s 12.5@117mph.
If you`re happy with the normal gauges on full brightness you can just unplug and jumper the connector, you then have the rheostat free to wire up as you wish to use with the Stack`s (convert it to +ve feed).

hmm I'd have to check exactly how I have my greddy gauges setup, but I'm using the stock rheostat just fine.
Parting 6 speed
Pampena 3.5 Stroker, GTX 2867 Gen IIs, AEM Series2, oohnoo SMIC, DN Hardpipes, FIC 1650s, Walbro 525, aermotive fpr, Dejon intake pipes, Tial Q, Koyo Rad, Samco Hoses, Stoptech 332mm fronts, HKS GT4 Coilovers, Spec 4+ LW, JDM 6 Speed, Billet shift forks, Pampena brace
|
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
|
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
|
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
|
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
Bookmarks