Bunch of New Parts on the Site.

[aaronatstate]

Sounds like you've done a bit more research than me. . If the connector is the same then the harness form the install kit should at least work, right?

It would appear it is not the same, but it shouldn't be that hard to hook up anyway. A friend running it said its 100% quiet, and not quiet for a Walbro, quiet as in can hear the fuel flowing in the lines over the pump running quiet.

And actually the current draw is more, by about 4 amps, but if you have your fuel pump hotwired already, it shouldn't matter like you said.

[aaronatstate]

This pump is wicked, it flows over 255 lph up to around 85psi of rail pressure. That means one pump can support 750cc ish injectors...

[Maximal]

Yeah, from what I hear it's one of the more popular pumps for big builds now, just a matter of time before we see them in 3Ss hopefully.

[Maximal]

Just added some CXRacing parts as we just picked up that line yesterday. Check out the intake, cooling, and intercooler sections.

[DrGonzo]

Terry - Might be good to add a "New Products" Link on your Store front so people can easily see what you have just recently added.


Also You may want to check which version of the CX-Racing hard pipe kit they are shipping. Your picture shows the old Version 1 kit. The one I had delivered a couple weeks ago is the newer version which eliminates that stupid S shaped drivers side hose and the rear turbo pipe is now two pieces for better fitment. Yours is priced for the later version kit. The version 1 kits they are trying to get rid of "Cause they fit like ass" and seriously dropped the prices on them.

[Maximal]

Terry - Might be good to add a "New Products" Link on your Store front so people can easily see what you have just recently added.


Also You may want to check which version of the CX-Racing hard pipe kit they are shipping. Your picture shows the old Version 1 kit. The one I had delivered a couple weeks ago is the newer version which eliminates that stupid S shaped drivers side hose and the rear turbo pipe is now two pieces for better fitment. Yours is priced for the later version kit. The version 1 kits they are trying to get rid of "Cause they fit like ass" and seriously dropped the prices on them.

That's a good idea on the new products...I'll have to check if the software is capable of that.

As for the hardpipe kit it is the new version...they just haven't updated their pics yet so I don't have access to a newer one...

[Maximal]

And the new products on the homepge was as easy as a checkbox....

[DrGonzo]

I figured it would be....LOL

[Maximal]

Yeah, it doesn't look super clean but it make sense for at least the immediate future with all the new additions to the site.

[DrGonzo]

Might want to try and move the New Products box on top of the updates/news. It will flow better with the store.

Drop me a line sometime and I'll work on spicing up your site for ya!! No offence but it is kind of Bland....