Bunch of New Parts on the Site.

[Maximal]

Just wanted to give you guys a heads up that I have added a fair amount of new parts to the site over the past week or so. New product lines include Tein, Defi, DBA, ARP, Addco, Corbeau, and Walbro. Lots of new products from existing lines I already had on there too. Right now I'm working on getting gauges added and will probably have the biggest selection of any 3S vendor once it's done (adding gauges is a pain).

If you guys need a part you don't see let me know and I'll get it added because chances are I carry it and if not I can get it.

Site: Maximal Performance

Also, as I add the parts I've been posting it up to facebook so check that out too: Maximal Performance | Facebook

[green-lantern]

Very cool

[Alan92RTTT]

Nice..

[B-Man]

How 'bout some setrab oil coolers?

[Maximal]

How 'bout some setrab oil coolers?

Just the cores or a whole kit? I was working on a kit using a different core however I went a little crazy with the sizing and it's going to be tricky to fit in the stock location.

[B-Man]

Just a front mount core.

[Maximal]

As of now I don't have a supplier that carries Setrab but I'll look into it. I can get Afco though who also makes a quailty core...that's what I'm running on my car and have been pretty happy with it.

[B-Man]

Sure, if you wanna look that up for me. Turns out I actually asked you about a Setrab before

[Maximal]

8x11x1.5 or 11x11x1.5?

I don't have my price sheet with me but I'm thinking around $80 and $100 respectively by the time you get shipping involved. I'm running the 8x11 in the stock location (barely) and it handles my cooling pretty well. I actually think I have one of those in stock right now as it's what I was using to mock up the SMOC I was working on.

[B-Man]

I was thinking 16"x6" ish. Seems an uncommon size. Trying to do similar to Phil's: http://www.supercar-engineering.com/...MOC/index.html