Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 34

Thread: Help!!!!!!

  1. #21
    Member Not Verified
    Join Date
    Apr 2011
    Owner Since
    4/1/2011

    Location
    buffalo NY
    Posts
    151
    Thanks
    0
    Thanked 0 Times in 0 Posts
    We already wired one in but yeah on my first sl TT swap I used sl harness with no resistor pack and it ran with out it
    1991 3kgt sl, all forged internals, 450cc injectors, 13t's, eBay turbo back, walbro 255, hks ssqv bov,turbo smart mbc, 3sx fuel loop, 3sx polly mounts, 3sx dual core rad, FMIC, 99 big bore lifters, xtd stage 3 clutch

  2. #22
    Member verified
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    Fowlerville, MI
    Posts
    1,251
    Thanks
    42
    Thanked 48 Times in 41 Posts
    Quote Originally Posted by dsmnoob91 View Post
    We already wired one in but yeah on my first sl TT swap I used sl harness with no resistor pack and it ran with out it
    With TT inj?
    '92 Dodge Stealth RT/TT - Aug. 2012 COTM

  3. #23
    Member Not Verified
    Join Date
    Apr 2011
    Owner Since
    4/1/2011

    Location
    buffalo NY
    Posts
    151
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Yeah it ran super rich but it did run

  4. #24
    Member verified
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    Fowlerville, MI
    Posts
    1,251
    Thanks
    42
    Thanked 48 Times in 41 Posts
    I'm surprised you didn't kill the inj drivers

  5. #25
    Member Not Verified
    Join Date
    Apr 2011
    Owner Since
    4/1/2011

    Location
    buffalo NY
    Posts
    151
    Thanks
    0
    Thanked 0 Times in 0 Posts
    The place that Rex's car is at mow the guy says that the cylinders are filling up with too much fuel And it is killing the spark but the spark never dies out it's always constant and strong we also have thrown quite a few new sets of plugs at it

  6. #26
    Real drivers don't use speed limits verified
    Join Date
    Sep 2010
    Owner Since

    Location
    Buffalo, New York
    Posts
    172
    Thanks
    1
    Thanked 9 Times in 4 Posts
    Well it's different from checking the spark out of the cylinder, because there is nothing to put it out. It is possible and I told Rex before that it is possible for it to be flooding the cylinder and putting the spark out. Hard to believe, but it is possible. This is why my first thought was dealing with the injector resistor pack. But like other people have said on here, it is multiple of problems with this and I am glad to see other people who have more experience with the conversion chime in.

  7. #27
    Real drivers don't use speed limits verified
    Join Date
    Sep 2010
    Owner Since

    Location
    Buffalo, New York
    Posts
    172
    Thanks
    1
    Thanked 9 Times in 4 Posts
    On the compression stroke, it doesn't fire until a tad bit after TDC, so if there is too much fuel, it is going to foul the plug out and it will not send a spark, or strong enough spark to do the power stroke.

  8. #28
    Member Not Verified
    Join Date
    Apr 2011
    Owner Since
    4/1/2011

    Location
    buffalo NY
    Posts
    151
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Think with the vr4 harness the fuel pump relay will make a difference?

  9. #29
    1st ever COTM and COTY verified
    Join Date
    Aug 2010
    Owner Since
    Birth

    Location
    Tennessee
    Posts
    7,077
    Thanks
    649
    Thanked 451 Times in 347 Posts
    Quote Originally Posted by dsmnoob91 View Post
    We already wired one in but yeah on my first sl TT swap I used sl harness with no resistor pack and it ran with out it
    Quote Originally Posted by B-Man View Post
    I'm surprised you didn't kill the inj drivers
    This

    Quote Originally Posted by Woz View Post
    On the compression stroke, it doesn't fire until a tad bit after TDC, so if there is too much fuel, it is going to foul the plug out and it will not send a spark, or strong enough spark to do the power stroke.
    I’m pretty sure it fires before TDC but the fuel doesn’t burn until after. From what I understand the fuel takes time to burn so it has to spark before TDC to be a useful combustion. Still the fuel is sprayed in before spark so if the AF ratio is way rich the fuel will not burn.

    Quote Originally Posted by HilbillyHomeboy View Post
    I bet she smells of old mustard and sawdust.
    Jeremy

  10. #30
    Member Not Verified
    Join Date
    Apr 2011
    Owner Since
    4/1/2011

    Location
    buffalo NY
    Posts
    151
    Thanks
    0
    Thanked 0 Times in 0 Posts
    What would happen if the heads were shaved down too much? The cylinders are not hitting valves or the plugs but could that effect it if someone shaved them to far down? Like I said the heads are fresh never fired when I gave them to rex

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering