Results 1 to 10 of 10

Thread: bucking when driving

  1. #1
    Member Not Verified
    Join Date
    Apr 2011
    Owner Since
    4/1/2011

    Location
    buffalo NY
    Posts
    151
    Thanks
    0
    Thanked 0 Times in 0 Posts

    bucking when driving

    i just put a na motor back in my car well i build my tt motor, nut now when i drive at a constant speed it bucks almost like a miss fire but if you drop a gear and keep the r's up it goes away also it has a issue with popping the cig lighter fuse and wont allow the car to start but if you unplug cyl1 fuel injector it starts and you can put the fuse in and drive the car... and starting the car is a pain in the ass too... any ideas? i am going to put a new fuel filter in tomorrow the one now is the original and i am still using my walbro 255 fuel pump.
    1991 3kgt sl, all forged internals, 450cc injectors, 13t's, eBay turbo back, walbro 255, hks ssqv bov,turbo smart mbc, 3sx fuel loop, 3sx polly mounts, 3sx dual core rad, FMIC, 99 big bore lifters, xtd stage 3 clutch

  2. #2
    Member Not Verified
    Join Date
    Sep 2010
    Owner Since
    '09

    Location
    Myrtle Beach
    Posts
    2,604
    Thanks
    120
    Thanked 131 Times in 95 Posts
    Sounds like you are having some light load "surge".

  3. #3
    Member Not Verified
    Join Date
    Apr 2011
    Owner Since
    4/1/2011

    Location
    buffalo NY
    Posts
    151
    Thanks
    0
    Thanked 0 Times in 0 Posts
    What's that how do I fix it?

  4. #4
    Member Not Verified
    Join Date
    Sep 2010
    Owner Since
    '09

    Location
    Myrtle Beach
    Posts
    2,604
    Thanks
    120
    Thanked 131 Times in 95 Posts
    Basically at such a low load/rpm the turbos fight against each other, when the air from the turbos hits the tb it's blocked (partially) and sent backwards through the ic piping, stopping the turbos and making its way back out the intake.


    You can mess with the ic/intake pipes but there isn't really anything you can do about it besides a balance tube.

  5. #5
    Twin Turbo verified
    Join Date
    Sep 2010
    Owner Since
    2007

    Location
    Melbourne, Australia
    Posts
    2,123
    Thanks
    76
    Thanked 91 Times in 75 Posts
    try running with the MAF unplugged and see if the bucking is still there.
    1990 JDM GTO TT with Vi-PEC plug-in V44 EMS, TD04-13T's, 3SX Downpipe, MP Hi-flow cat, ARC SMIC's, Aeromotive Stealth 340LPH pump, Fuelab 515 FPR, Ninja Performance 75amp hotwire kit, oohnoo fuel loop & rail adapters, Nylon braided ethanol fuel line, NGK AFX Wideband, K&N FIPK, Iridium plugs, HKS Twin Power DLI, Turbo XS racing BOV, 3SX poly mounts, Custom 280km/h speedo.

    Waiting install
    Injector Dynamics 725cc Injectors.

    Build Thread

  6. #6
    Member Not Verified
    Join Date
    Apr 2011
    Owner Since
    4/1/2011

    Location
    buffalo NY
    Posts
    151
    Thanks
    0
    Thanked 0 Times in 0 Posts
    It's not turbo anymore

  7. #7
    Member Not Verified
    Join Date
    Sep 2010
    Owner Since
    '09

    Location
    Myrtle Beach
    Posts
    2,604
    Thanks
    120
    Thanked 131 Times in 95 Posts
    Are you still using the tt ecu?

  8. #8
    One day....it will be on 4 wheels. supporter
    Join Date
    Sep 2010
    Owner Since
    2004

    Posts
    1,804
    Thanks
    153
    Thanked 37 Times in 30 Posts
    Quote Originally Posted by GTOJOE View Post
    try running with the MAF unplugged and see if the bucking is still there.
    this.........................
    Building a House, Car Mods on hold!
    1996 GTO, Owner since 2003.

  9. #9
    Banned Not Verified Blackmount's Avatar
    Join Date
    Apr 2011
    Owner Since
    Mid-April 2011.

    Location
    Monroe WI
    Posts
    1,466
    Thanks
    78
    Thanked 24 Times in 21 Posts
    Had a similar problem with my old Laser, it would buck hard at low rpms, and it got worse and worse and worse till it was like It was like i had 3000rpm revlimiter where car wouldn't even free rev past 3k. it turned out to be the ECU, but it would always throw the code for MAF, and somedays the car would flood so I'd have to unplug injectors to get it to start, then plug them back in before it died. Sometimes similar problems are caused by bad vacuum leaks tho.

  10. #10
    Member Not Verified
    Join Date
    Apr 2011
    Owner Since
    4/1/2011

    Location
    buffalo NY
    Posts
    151
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I'll try the ecu and my clutch that has 200miles at most on it is slipping now too

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering