Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 31

Thread: ac help

  1. #11
    i have those gauges, but they dont pull a vacuum. they just read your pressure

  2. #12
    Forum User verified
    Join Date
    Sep 2010
    Owner Since
    Sept 2000

    Location
    Omaha, Nebraska
    Posts
    6
    Thanks
    0
    Thanked 3 Times in 2 Posts
    Quote Originally Posted by mtpockets20 View Post
    ok i believe i found the leak, i have dye surrounding these two things on my compressor, although i have no i dea what they are for an weather they could be changed. anyone could shed some light as to what these things are circled an if they can be changed or do i need a new compressor id really appreciate it, thank you


    The one on the right is the high pressure relief valve, not sure on the other.

  3. The Following User Says Thank You to MajorWedgee For This Useful Post:


  4. #13
    Southernmost 3S Owner supporter
    Join Date
    Sep 2010
    Owner Since
    1996

    Location
    Key Largo, FL
    Posts
    1,049
    Thanks
    155
    Thanked 199 Times in 129 Posts
    You never answered n2nsanity's question about changing the compressor. If you're trying to put r134 gas in a compressor designed for r12 freon, then you've probably messed up your AC system.


    2015 NG: Best in Show. Best Custom Interior. Best Custom Exterior. 2nd place,Best Engine Bay. 2nd place,Best 1st Gen. 2nd place,Longest distance driven. 3rd place, Coolest Accessories. 3rd place, Autocross Class 2
    2014 NG: Best in Show. Best 1st Gen. 2nd place, Best Interior. 2nd place, Furthest Distance Driven. 3rd Place, Peoples Choice. 3rd place, Best Engine Bay. 3rd place, Best Custom Exterior
    2013 NG: 1st place, FWD Drags
    2011 NG: Best Overall and Best 1st Gen. 3rd place Autocross FWD Modified and FWD Drags
    2009 NG: Best 1st Gen 3S and Best Interior. 3rd place, Autocross, FWD Modified.

    Mods include 18in. Moda wheels and BF Goodrich KDW's, Tein Flex suspension, R1 Concepts rotors, 3SX stainless steel engine dress up kit. Blue/black carbon fiber 575 hood, VLS and a full RT conversion. Audio mods include a Kenwood DVD touch screen HU, Kenwood speakers, Memphis audio 5 channel amp and 12" Subs. Corbeau Leather seats, carbon fiber dash trim and HID upgrade.

  5. #14
    Forum User
    Join Date
    Sep 2010
    Owner Since

    Posts
    196
    Thanks
    5
    Thanked 25 Times in 17 Posts
    just put in pag 46 oil. The compressor doesn't care if you us r12 or 134a. Very few cars are left running r12 but they still use the same compressor.

    Most powerful 13T car in the world @501awhp, PTE 780CC injectors, AFPR, E85, Greddy Profec B, 3.5" Granatelli MAF, MAFT, SS Headers and O2 housings front, 3SX downpipe, CRX racing FMIC, Dejon intake pipes, Ground Controls, Maximal adjustable rear control arms, Maximal TC Brace, Poly front and rear mounts, Vacuum Reduction, EGR block off plate, Hot Wired Walbro 255 and inline Walbro 255, Southbend stage 3 clutch, Slotted and vented rotors, SAFCII, Turbo XS BOV, 3SX FP hotwire, Seatle Short Shifter, Jackhammer timing gears: Best 1/4 mile 12.33 at 114.9 mph 1.79 60ft.

  6. #15
    94 3500gt vr2? verified
    Join Date
    Sep 2010
    Owner Since
    2007

    Location
    NC
    Posts
    1,074
    Blog Entries
    4
    Thanks
    103
    Thanked 29 Times in 17 Posts
    you can definitely get away with just flushing the system and adding 134 and pag oil
    supposed to change out the compressor and drier tho, or at least a thorough cleaning and new seals in the old compressor
    not sure what effect, if any, the 134 would have on the old compressor or sensors
    also never hurts to change out the drier, that's like an oil filter, but for ac system

    there's some guys on ebay that reman compressors for < $200
    but keep in mind, not having receipts because you did the work yourself, usually voids the warranty

    wow, $400 for a new one. cheapest new i've seen yet
    http://cgi.ebay.com/ebaymotors/NEW-G...ht_2797wt_1165
    Last edited by n2nsanity; 07-17-2011 at 04:02 AM.
    __________________________________________________


  7. #16
    Forum User
    Join Date
    Sep 2010
    Owner Since

    Posts
    196
    Thanks
    5
    Thanked 25 Times in 17 Posts
    If you change the compressor you need to change the drier or yes it voids the warranty.

    You might want to give these guys a call

    G.A.C Auto Compressor Supply

    I deal with them all the time, in fact picked up a rebuilt one today. Tell them Mike sent you. They just got in 25 cores to rebuild. They're getting harder to find. The fact is if you still have your original compressor it's probably lost a lot.

    rebuilt compressor plus 4 ounces Pag 46 plus new drier plus good evacuation and refill = nice cold AC. Unless your expansion valve is plugged or you have a leak.

  8. #17
    Quote Originally Posted by MajorWedgee View Post
    The one on the right is the high pressure relief valve, not sure on the other.
    i was told the thing on the bottom, the one i dont have circled is the high pressure relief.

    anyways i did change all my orings out before converted, did not add any pag oil though, just added refrigerant an it worked fine for 1 month or so, than if formed a leak in the thing i have circled so i pulled it out an it had 3 orings on it that were tore up so i changed those out an just added r134a, didnt pull a vacuum, i have no leaks but im still blowing hot air, my compressor is fine, kicks on when it should when the car is off the pressure readings are equal an when your running about 2k rpms it reads different on each side, all that indicates a perfect compressor. im assuming its blowing hot air because i didnt vacuum or change the drier. atelast thats what im hoping. god please im tired of wasting money on this shit

  9. #18
    can anyone show me the expansion valve, like find it on ebay. when i looked i found something that i dont have any idea what it is, i want to buy it but make sure i have the right part. thank you

  10. #19
    Never finishes any verified

    Join Date
    Sep 2010
    Owner Since
    2001

    Location
    Wake Forest, NC
    Posts
    2,518
    Thanks
    51
    Thanked 197 Times in 140 Posts
    The expansion valve is located in the evaporator core under the pass dash in the black box connected to the fan blower assembly.

    On your image of the compressor. the lower silver one is the High pressure relief valve, The one with wires its the pressure sensor. The larger one in the middle I believe is just a service point. The one on top is the revolution sensor.

    get rid of that crap gauge that came with the can. Those damn things never read right. Get a set of gauges like n2nsanity posted from HF. Don't use your A/C system until you are sure you have not over filled your system. if it is over charged then you risk blowing the relief valve and then your screwed as they don't reset after they release.

    An over charged system will cause it to blow hot air as the system is unable to cool off due to being over charged. If the system was open to the atmosphere for a long period of time then it needs to be completely flushed, the expansion valve, receiver dryer and all o-rings need to be replaced. Both r-12 and r-134 become acid when mixed with the moisture in the air. If the system was open to long and moisture got in the receiver dryer is bad and not able to absorb any more moisture, you now have traces of acid in the system eating away at the seals and valves.

    If you have it apart, flush the system, replace all seals, valve and dryer, evacuate the system and let it sit for 24 hours. If it is able to hold the vacuum then charge the system to what is stated in the service manual "think minus 5-9psi as the service manual is for r-12" and it should work fine.

    Check it out on Youtube!!


    93 Stealth TT - The Stealth Project

    Renegade Tech Works ECS Controller on Intrax Springs
    Chrome ECU
    Hybrid 13g's
    EVO 560cc Injectors
    Spec Stage 3 clutch
    Ninja Performance Output shaft & Input spool
    Ninja Performance Solid Tensioner & Gates racing T-Belt
    CX Racing Dual Core FMIC
    Megan SS Exhaust
    Fidanza Cam Gears and Clear Covers
    3rd Gen Lifters
    HKS BOV
    K&N FIPK
    Maximal High flow converter
    Walbro FP & FuelLab FPR
    Maximal and Seattle Solid Mounts
    All -6an Lines
    Custom -6AN coolant neck lines
    AWS/ABS/Cruise Delete
    MP Rear Control Arms
    SS Brake Lines
    99 Front Conversion
    2nd gen Rear Bumper
    99 Combat Wing
    Complete interior LED Swap
    Skillard Fuel channel
    Oohnoo FPR Bracket
    .
    .
    More to Come......

  11. #20
    Forum User
    Join Date
    Sep 2010
    Owner Since

    Posts
    196
    Thanks
    5
    Thanked 25 Times in 17 Posts
    Quote Originally Posted by mtpockets20 View Post
    i was told the thing on the bottom, the one i dont have circled is the high pressure relief.

    anyways i did change all my orings out before converted, did not add any pag oil though, just added refrigerant an it worked fine for 1 month or so, than if formed a leak in the thing i have circled so i pulled it out an it had 3 orings on it that were tore up so i changed those out an just added r134a, didnt pull a vacuum, i have no leaks but im still blowing hot air, my compressor is fine, kicks on when it should when the car is off the pressure readings are equal an when your running about 2k rpms it reads different on each side, all that indicates a perfect compressor. im assuming its blowing hot air because i didnt vacuum or change the drier. atelast thats what im hoping. god please im tired of wasting money on this shit
    there's your problem.

    either get a vacuum pump or take it somewhere and have it done. I like to leave it evacuating at least for an hour to boil out any moisture.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering