
they are most likely both TD04L. The compressor housings on a lot of non stock 3/s 13Gs are mis-stamped.
Parting 6 speed
Pampena 3.5 Stroker, GTX 2867 Gen IIs, AEM Series2, oohnoo SMIC, DN Hardpipes, FIC 1650s, Walbro 525, aermotive fpr, Dejon intake pipes, Tial Q, Koyo Rad, Samco Hoses, Stoptech 332mm fronts, HKS GT4 Coilovers, Spec 4+ LW, JDM 6 Speed, Billet shift forks, Pampena brace

As far as I know no genuine mitsu 13g was ever tdo4hl.
The optional factory 13g upgrade was td04l.
Volvos came with 15g and 19t td04hls
Close to 600awhp has been made through 19t td04l turbid.
I do not think the l turbine is a bottleneck for 13g size turbos. Anything larger will only add more lag
Sent from my DROIDX using Tapatalk
You are right on the 13G being paired with the TD04HL. The TD04HL's used a 13T wheel as opposed to the 13G. The 13T is a superback wheel and the g is a flatback so that would need to be taken into consideration with a rebuild kit.
Okay - so probably best to look for another TDO4/13G to optimize things, right?
|
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
|
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
|
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
|
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
Bookmarks