Page 2 of 17 FirstFirst 123412 ... LastLast
Results 11 to 20 of 169

Thread: Home Improvements

  1. #11
    Chris said ninjas don't fall down.
    Join Date
    Sep 2010
    Owner Since
    7/07/07

    Location
    Driving Chris back.
    Posts
    563
    Thanks
    75
    Thanked 103 Times in 68 Posts
    Quote Originally Posted by green-lantern View Post
    Why are you taking the one fireplace out?
    The first set of pictures: The chimney was cut off when a new roof was added two years ago. The shared fireplaces were in disrepair, so there really was no reason to keep them. We took them out and are going to make the space in between the two rooms a master walk-through closet.

    The second set of pics: The LR fireplace was closed in at one time so that a wood stove could be piped out the chimney. We prefer the fireplace look and think it will appeal more, so we opened it up and are set to repair it and make it prettier.


    Quote Originally Posted by green-lantern View Post
    Damn....that's nice. All done by you??


    Quote Originally Posted by 2fnloud View Post
    Uggghhh...thankfully they were empty. What a nightmare had they not been.

  2. #12
    Monogamous Gigolo verified
    Join Date
    Sep 2010
    Owner Since
    October 2009

    Location
    Ithaca, Mi.
    Posts
    2,755
    Blog Entries
    3
    Thanks
    605
    Thanked 190 Times in 131 Posts
    Yeah I know right. When I pried the boards off to reveal that, I about dropped a load in my pants, then I realized that it was empty. I did have to deal with one but it was only golf ball sized. I busted out a can of 3m spray glue hit up knocked it done and danced a little jig on the hive.

    I also noticed a paper wasp hive that was huge in one of my roof over hangs, that too was abandoned. I managed to get rid of most of that with the shop vac.

  3. #13
    Forum User verified
    Join Date
    Sep 2010
    Owner Since
    2002

    Location
    West MI
    Posts
    314
    Thanks
    15
    Thanked 32 Times in 18 Posts
    That j-box in the floor is worse that the wasp hives, lol. But I would find something funky with most houses, me being an electrician. When I have some time Ill post some pics, I have tons from the past few years.

  4. #14
    Monogamous Gigolo verified
    Join Date
    Sep 2010
    Owner Since
    October 2009

    Location
    Ithaca, Mi.
    Posts
    2,755
    Blog Entries
    3
    Thanks
    605
    Thanked 190 Times in 131 Posts
    Matt,

    That was my doing. I had my "duh" moment after the fact. I realize that I should of spent the extra 10-12 feet of wire to have that junction box be in the attic.

    I will be keeping an access panel in the floor to access it. My uncle is an electrician for the dept. of corrections. He has been an invaluable source of proper information.

    However Matt, if you know of a guaranteed way to terminate that junction box so I don't have to have a access panel in the floor, I am all eyes to read about it.

  5. #15
    GREASE BUNNY
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    VA
    Posts
    1,045
    Thanks
    131
    Thanked 94 Times in 68 Posts
    Quote Originally Posted by green-lantern View Post
    A more up to date pic. You can see the light under the bar. I installed a rope light under it behind some trim. You can also see I need to take the trash out.

    Big garage + man cave = Happy marriage

    Quote Originally Posted by 2fnloud View Post
    Yeah I know right. When I pried the boards off to reveal that, I about dropped a load in my pants, then I realized that it was empty. I did have to deal with one but it was only golf ball sized. I busted out a can of 3m spray glue hit up knocked it done and danced a little jig on the hive.

    I also noticed a paper wasp hive that was huge in one of my roof over hangs, that too was abandoned. I managed to get rid of most of that with the shop vac.
    What a nest!

    Your upstairs looks like what we have been doing.
    We had to completely tear out everything and start over.
    Quote Originally Posted by green-lantern View Post
    Oh Karen, you made me smile today.

  6. The Following User Says Thank You to Granny For This Useful Post:


  7. #16
    1st ever COTM and COTY verified
    Join Date
    Aug 2010
    Owner Since
    Birth

    Location
    Tennessee
    Posts
    7,077
    Thanks
    649
    Thanked 451 Times in 347 Posts
    Quote Originally Posted by beepbeep View Post
    The first set of pictures: The chimney was cut off when a new roof was added two years ago. The shared fireplaces were in disrepair, so there really was no reason to keep them. We took them out and are going to make the space in between the two rooms a master walk-through closet.

    The second set of pics: The LR fireplace was closed in at one time so that a wood stove could be piped out the chimney. We prefer the fireplace look and think it will appeal more, so we opened it up and are set to repair it and make it prettier.
    Ahh makes sense.

    Quote Originally Posted by beepbeep View Post
    Damn....that's nice. All done by you??
    Yeah, The cool thing is I used everything that was already here except the wood around the track lighting. I had to extend the wall out for the bar so I used the wood that I cut out of the top of the wall. The bar top was this big long table I cut and made L shaped to fit. It didn't hardly cost anything but time. The bad thing is the people that built the wall had a nail gun and loved to use it. I cussed the hell out of them when I was taking it apart.

    Quote Originally Posted by HilbillyHomeboy View Post
    I bet she smells of old mustard and sawdust.
    Jeremy

  8. #17
    Monogamous Gigolo verified
    Join Date
    Sep 2010
    Owner Since
    October 2009

    Location
    Ithaca, Mi.
    Posts
    2,755
    Blog Entries
    3
    Thanks
    605
    Thanked 190 Times in 131 Posts
    Quote Originally Posted by Granny View Post
    Big garage + man cave = Happy marriage



    What a nest!

    Your upstairs looks like what we have been doing.
    We had to completely tear out everything and start over.

    Yeah, my wife and I decided that this way would be the best way. As we plan to remodel a room, we will be tearing the room down to studs. This way the old settled insulation gets replaced with nice fiberglass insulation.

    I have even thought to go as far as stripping the outside to stud, Tyvak wrap the house and then reside. I would need to ask my sources if going THAT far is even required to get the house insulated that well.

    The attic floors/upstairs celings have an R factor or 49.

  9. #18
    Chris said ninjas don't fall down.
    Join Date
    Sep 2010
    Owner Since
    7/07/07

    Location
    Driving Chris back.
    Posts
    563
    Thanks
    75
    Thanked 103 Times in 68 Posts
    Here this is the progress we've had this week (minus some little projects I've been working on like filling in nail holes and punctures in drywall throughout the house).

    After tearing out rotted drywall and boards behind:



    After hanging drywall:



    Then, there were two doorways that we wanted to re-situate. The first one led from the LR to a bedroom. We are closing off that doorway, for the bedroom will now be the master bath, accessed only through the master bedroom.

    Here is the before on Door #1:
    (Sorry, I don't have a better shot of the whole wall with the doorway from before)


    After we removed the doorframe (to be used elsewhere):



    Where we framed in for the drywall:



    And finally, after the drywall was hung and then mudded:




  10. #19
    Chris said ninjas don't fall down.
    Join Date
    Sep 2010
    Owner Since
    7/07/07

    Location
    Driving Chris back.
    Posts
    563
    Thanks
    75
    Thanked 103 Times in 68 Posts
    Doorway #2--there were two closets in the LR and none in one front 'bedroom'. We are closing off one closet in the LR and opening it up in the adjoining room, which would be that front bedroom.

    From the LR views:
    (taking out and closing in door on right of fireplace)


    After door frame removal (frame being used on 'new' closet):



    Framed for drywall:



    And drywalled and mudded:



    From the front room's perspective:

    From before removing the masonite from the walls (horrible mold behind all of it..yuck!) Closet will go on the far side of the fireplace, near the window:



    After removing the masonite and finding they had tried to paint some:



    Bringing the doorframe from the LR to use here:



    Chris cutting the outline for the doorway to make the closet:



    And that's where we are so far. It's been too cold (there is no heat/air in the house) for the mud to dry, so we can't sand yet. We are hoping it will be dry by the beginning of next week so we can keep going with that part. Right now we are researching refinishing the hardwood floors ourselves as well as getting quotes to have it done professionally.

  11. #20
    GREASE BUNNY
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    VA
    Posts
    1,045
    Thanks
    131
    Thanked 94 Times in 68 Posts
    Oh, Oh! Questions!

    Are the 2 fireplaces back to back and are you planning on keeping them?
    What plans do you have for the walls in the front bedroom?
    Why do you think this house has such a bad mold problem and what are you doing to make sure it dosen't return?

    I'm really envious that you have a clean work area. I have so much junk to work around.



    Left to right..LOL
    Flooring for under eaves, bed for guest room covered with God only know what, Mikes tools, new cabinets to be installed on that side, new TV box I don't want to throw out yet but is too big to store , antique armoire that came with the house and a 70's office chair in the back that one of the Grandsons took today for his room at home!

    Mike started on this side last weekend. 3 of the 5 cabinest are installed.
    I hope to post some more productive pics after next week.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering