Data logging?

**Roy** · 12-01-2010, 07:24 PM

Originally Posted by Kilo_SME

I would like to know more about this. So you made your own cable? Might not be a bad idea for the time being but I do want a palm for the car in the long run. Also I have a 93 still on the na ecu.

You can download the TMO datalogging software here:http://roycormier.net/download/tmolog.zip

This is the diagram for the 1G cable, its pretty simple. You could find the parts at radio shack or somewhere similar. You'll need an RS232 connector, a 1N914 diode, a 10K resistor, some wire, and 3 spade connectors.

And this is the pinout for the diagnostic connector (from stealth316.com). I used spade connectors to connect the cable to each of the 3 pins used.

**Kilo_SME** · 12-01-2010, 08:33 PM

Originally Posted by Roy

You can download the TMO datalogging software here:http://roycormier.net/download/tmolog.zip

This is the diagram for the 1G cable, its pretty simple. You could find the parts at radio shack or somewhere similar. You'll need an RS232 connector, a 1N914 diode, a 10K resistor, some wire, and 3 spade connectors.

And this is the pinout for the diagnostic connector (from stealth316.com). I used spade connectors to connect the cable to each of the 3 pins used.

Damn, it uses a com port? Any way I could do it with a usb wire? I have all of those parts right here lol.(I do alot of xbox modding)

Edit:
Haha I have a com to usb wire to so I should be good. You have a pic of the wire you can throw up. It would be really helpful.

**blindmist** · 12-02-2010, 12:07 AM

Originally Posted by Kilo_SME

Damn, it uses a com port? Any way I could do it with a usb wire? I have all of those parts right here lol.(I do alot of xbox modding)

Edit:
Haha I have a com to usb wire to so I should be good. You have a pic of the wire you can throw up. It would be really helpful.

I highly doubt it will support the 1956 baud rate that the ECU talks. The ONLY RS232 to USB adapter I have seen work is the Keyspan US-19H

**terrets** · 12-02-2010, 06:47 PM

Someone else found an adapter that was 2 bucks on ebay...I have no idea what thread it was in though, sorry..
I did get the keyspan adapter works fine..

**Kilo_SME** · 12-02-2010, 07:22 PM

Originally Posted by terrets

Someone else found an adapter that was 2 bucks on ebay...I have no idea what thread it was in though, sorry..
I did get the keyspan adapter works fine..

Is it on this site or the other site?

**Roybatty** · 12-03-2010, 02:48 PM

HHH doesn't do palm....strictly a laptop.

Hate to hijack this thread...but... Is anyone supporting MMCd these days. I saw CBatters has something on the other site but hasn't been updated in a while.