Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: Low RPM Hesitation

  1. #11
    Secret Lurker Man! verified
    Join Date
    Sep 2010
    Owner Since
    7/10/06 or somethin

    Location
    Bend, Oregon
    Posts
    452
    Thanks
    13
    Thanked 20 Times in 14 Posts
    Quote Originally Posted by CoopKill View Post
    After thinking about it more, I was wrong. If you had a boost leak it would run ok at lower rpm out of boost and like crap in boost. My bad.

    Try logging, especially the fuel trims, O2's, and timing. Post the logs and see if someone with more knowledge than I can make sense of it.
    Should i log the lower RPMs where the problem is, or should i do a third gear pull? I've never really logged before, only use it for checking things like ISC count n what not

  2. #12
    Member verified
    Join Date
    Sep 2010
    Owner Since
    Aug 15, 2005

    Location
    Texas
    Posts
    687
    Thanks
    15
    Thanked 45 Times in 28 Posts
    Quote Originally Posted by Nihil View Post
    Should i log the lower RPMs where the problem is, or should i do a third gear pull? I've never really logged before, only use it for checking things like ISC count n what not
    Log everything. Post it up here, and we will take a look.

  3. #13
    Secret Lurker Man! verified
    Join Date
    Sep 2010
    Owner Since
    7/10/06 or somethin

    Location
    Bend, Oregon
    Posts
    452
    Thanks
    13
    Thanked 20 Times in 14 Posts
    Ok, I've got logs, but I can't upload an excel file...I changed the file extension, and the size exceeds the forum limits as well...

    I was crusing the parkway, luggin' it in 5th gear for awhile, then dropped to 3rd to make a pass on a semi and I just held the gas on to see what would happen, it threw a CEL and when I pulled the code, it was O2 sensor and after looking at the logs, it looks like the front O2 has some low voltage readings, but I'm new to reading logs and knowing what to look for...

  4. #14
    Member verified
    Join Date
    Sep 2010
    Owner Since
    Aug 15, 2005

    Location
    Texas
    Posts
    687
    Thanks
    15
    Thanked 45 Times in 28 Posts
    While under a load, your o2 should be 0.93v-0.95v.

    Use some file upload service.

  5. #15

  6. #16
    Member verified
    Join Date
    Sep 2010
    Owner Since
    Aug 15, 2005

    Location
    Texas
    Posts
    687
    Thanks
    15
    Thanked 45 Times in 28 Posts
    TBH, I cant really tell what is wrong, but it looks like the o2's are fine from what I can tell.

    There is no knock, so there is no timing retard.

  7. #17
    Secret Lurker Man! verified
    Join Date
    Sep 2010
    Owner Since
    7/10/06 or somethin

    Location
    Bend, Oregon
    Posts
    452
    Thanks
    13
    Thanked 20 Times in 14 Posts
    it threw an O2 code for a second, and looking at the logs, the front O2 drops down to .04v which seems low and I'd think the front and rear would be in the same ball park area together.

    I don't know though, I'm no proffessional with reading logs

  8. #18
    Secret Lurker Man! verified
    Join Date
    Sep 2010
    Owner Since
    7/10/06 or somethin

    Location
    Bend, Oregon
    Posts
    452
    Thanks
    13
    Thanked 20 Times in 14 Posts
    thought I'd update this, just incase anyone ever has anything similar happen to them...

    Yeah, the O2's looked normal, everything I logged was while driving, then, as I was checking some things in the driveway, I noticed the rear O2 sensor was stuck at .8- volts and not oscilating like it should...O2 was bad, I threw in two new ones and the car runs perfect...I should have caught that A LOT sooner...I feel retarded...

    Makes sense now that I think about it, ran great in boost since under a load the O2's go open loop and it was stuck in open loop, which also makes sense as to why it'd backfire when you let off the gas...fuel cut wasn't happening on the rear bank

    Anyway...thought I'd post up results, I hate topics with no ending ha

  9. The Following 2 Users Say Thank You to Nihil For This Useful Post:


  10. #19
    Thanks for the update...in currently having the exact same problem, gonna check out the O2's now

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering