Found something cool on the net by accident. this has so much potential and you can do it to almost any car.
Found something cool on the net by accident. this has so much potential and you can do it to almost any car.
is that so you can adjust the suspension from inside the cabin with low-tech coilovers?
Hmmm, push rod suspension from an open wheel or DSR, that's not low tech, that's WAY hi-tech.![]()
www.stickyvinylgraphics.com
Custom Stickers & Graphics
www.chumpcar.com
Regional Series Promoter for the ChumpCar World Series
Pushrod suspension is dangerously easy to screw up.
how much weight will converting to pushrod add to the car?
Building a House, Car Mods on hold!
1996 GTO, Owner since 2003.
I ran 10k springs front and rear for awhile on my SL and liked it till the stock struts blew. I switched to Megan coilovers which are sprung more in the front. The shocks are much better than stock but in the rear I had to bump up the damping and add a 1/4" of spring preload to get the car to handle like it did with the 10k front and rear. Stiffening the rear relative to the front seems to just about eliminate understeer entirely. The car handles very neutral now. I know my car is fwd but I think the vr4 would benefit from stiffer rear springs as well.
Sent from my Galaxy Nexus using Tapatalk 2
1993 3000GT SL
Mods: 95 front end, Robomodded Glass Headlights, VIS CF hood, Megan Racing Coilovers, relocated battery, short ram intake, VR4 Plenum, OBX LSD, OBX longtube headers, test pipe, 3SX underdrive crank pulley, Fidanza 9lb flywheel, Spec stage 3 clutch, solid lower engine mounts, 80a poly filled upper/trans mount, poly front sway bar bushings, Momo steering wheel, 3rd gen lifters, Konig 18" wheels, 4300k HIDs, gutted trunk, AC delete, PS delete, Cruise Control delete, ABS delete, SRS delete.. Plus other random stuff.
Our chassi is begging for more rear spring guys.
This looks really really familiar
![]()
Hey guys, I wanted to update this with more information on calculating the actual wheel rates.
Once the motion ratio is determined apply this formulae...
Wheel Rate = ( ( MR^2) x SpringRate ) * sine(Spring Angle)
I'm working on a video for future reference. With any luck I'll have it posted by Saturday. I'll have the wheel/shock travel measurements thru 6" of articulation and the spring angles of inclination to properly calculate this thing.
|
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
|
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
|
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
|
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
Bookmarks