More scaled inputs

**Greg E** · 01-07-2013, 01:50 PM

How you guys liking the MAP and wideband scaled inputs?

I'm working on getting 3 or 4 more 5v inputs for data logging purposes. This will give you the ability to read any 5V sensor tapped into the ECU without the need for a gauge. Things like oil pressure/temp, EGTs, Ethanol sensor... All you need is a 5V sensor and its scaling.

**CoopKill** · 01-07-2013, 02:14 PM

Nice. I am a little out before at the point of setting this up, but sounds great.

**Toni** · 01-07-2013, 03:15 PM

Oh that's what I can try to get working while it's in the garage. The version I had it wasn't quite working. I'll let you know!

**GTWHOA** · 01-07-2013, 07:19 PM

I was looking at logging fuel pressure with a spare input.

**Greg E** · 01-07-2013, 08:22 PM

Originally Posted by GTWHOA

I was looking at logging fuel pressure with a spare input.

Same here.

**donniekak** · 01-07-2013, 09:21 PM

If you can log a map, and iat at the same time as rpm, and load, it would make it way easier to come up with a speed density algorithm. Is that in the works?

**Greg E** · 01-07-2013, 09:24 PM

Originally Posted by donniekak

If you can log a map, and iat at the same time as rpm, and load, it would make it way easier to come up with a speed density algorithm. Is that in the works?

Can not say at this time.

**Toni** · 01-09-2013, 04:08 PM

Originally Posted by GTWHOA

I was looking at logging fuel pressure with a spare input.

Originally Posted by Greg E

Same here.

I am currently logging my fuel pressure with the sensor that came with my apexi el2 meters. The trick here is to find a good inexpensive sensor to use. The one that came with my gauges is a NAGANO KEIKI CO., LTD. - KM10. Not sure if it can be sourced separately (outside apexi) and how much they run.

**Uniuno** · 01-09-2013, 05:08 PM

VDO Pressure Senders 360410 - SummitRacing.com

Decent price, or you could find one from a GM for about 20 bucks. They're everywhere!

**anyonebutme** · 01-10-2013, 08:10 PM

Hey Greg. Say I log FP and boost, is there a way to turn on an output master warning light (check engine light output) if FP does not rise 1:1 with boost outside a set limit?