FS: Performance Parts- Turbos, 550's, DN Pipes, Bov's, Walbro 255's, Boombslang etc

[92RT-TT]

Hey everybody,

I've got some stuff for sale that I'm not going to be using on my 94 Stealth.

MTC 6954 Billet TD05's- Brand new, just finished this set yesterday- come with a 1 year warranty- these are the same size turbos that Jesse made 767 awhp on. Asking 2800 shipped

-PTE 550cc injectors: 7k miles on them: 250 shipped

-Greddy Type S BOV (no adapter) 125 shipped
-Knockoff HKS SQV: 80 shipped

Total of 4 walbro 255's available- all new:
-Walbro 255 pump w/install/filter kit for 3S (brand new)(qty 3): 105 shipped each
-Walbro 255 pump w/no filter kit (brand new) (qty 1): 85 shipped

-Boomslang Harness for SAFC 2 (2nd gen) (Brand New): Here is the place I got it from: Boomslang Fabrication | A'PEXi SAFC Wire Harnesses SOLD

-DN Performance Pre-Turbo Pipes w/couplers: 150 shipped

-DN Performance Y pipe w/Black Coupler: 125 shipped

-Pre-Cat Eliminator Front: Was on my 93, took it off to put the car more back to stock: 75 shipped
-Pre-Cat eliminator Rear: SOLD

-Front OBX manifold-flange is flat and true- Asking 90 shipped (I can bolt this to a head and bolt a turbo onto it if you really want verification it fits). Edit just did this, as an fyi the center stud on the head will need to be shortened so that it clears the manifold

-Samco Red radiator hoses: like new condition: 100 shipped (new they are 125 plus shipping)

-Ground Control Coilovers on KYB Struts (Eibach springs so the ride isn't too rough): Not for sale anymore

-3sx SS fuel line from filter to rail w/adapter for fuel rail Brand new (seen here:3SX Custom Fuel Kit - From Stock Fuel Filter to Stock Fuel Rail - Mitsubishi 3000GT / Dodge Stealth Parts: 80 shipped which is less then you'll pay at 3sx after their shipping charge...

-Cianci 3 Gauge A-Pillar 60 mm. I paid 150 shipped, asking 125 shipped.

-AEM Meth Injection: 1 Gallon Brand New: 340 shipped

-AEM EUGO Widebands: 2 of them. One is brand new, the other the gauge is brand new but the sensor has 100 miles on it while a car was tuned.
New one I'm asking 190 shipped. The one with the new gauge but "used" sensor asking 175 shipped.

-AEM Digital Boost Gauge- SOLD
-1st Gen TT Heads: Full rebuilt and ready to bolt on: 1000 plus shipping- No core required. These were boiled, cleaned, all new MHI OEM valve stem seals put in, complete valve job done, all worn valve guides were replaced, and they were decked. These were done by a local company that I've had do several of my motors. He's currently doing another set of heads for me and a 1st gen block that will be up for sale soon as well.


I'm sure I've got more that I'm forgetting but for now these are the parts I can think of that I don't need.

Here's some pictures:

[mb3000]

Are the pre-turbo pipes for use with the stock bubble or the "mafless" style?

[keo92stealth]

whats the drop on those ground control coilovers? whatever?

[5150reckless]

ill take the pre cat pipes of your hands message me

[92RT-TT]

Are the pre-turbo pipes for use with the stock bubble or the "mafless" style?

They are the ones for use with the stock bubble

whats the drop on those ground control coilovers? whatever?

I believe you could go from stock to about 3 inch drop probably. There is a significant amount of threads to adjust the height with.

ill take the pre cat pipes of your hands message me

Sending you a pm



Oh and here's some more pictures
More pictures



Here's the 3sx fuel filter to fuel rail SS line kit:

[92RT-TT]

Bump! Still lots of stuff for sale!

[CoopKill]

I want the boost gauge, and possibly the Meth kit. Still researching that...

[92RT-TT]

I want the boost gauge, and possibly the Meth kit. Still researching that...

Sounds good, just let me know

[green-lantern]

-Front OBX manifold-flange is flat and true- Asking 90 shipped (I can bolt this to a head and bolt a turbo onto it if you really want verification it fits). Edit just did this, as an fyi the center stud on the head will need to be shortened so that it clears the manifold

I might take this off your hands. Ugg I'm a little worried it might cause surge issues if I replace the front and not the back though. I think my front is cracked so I need to do something.

BTW, those heads look great.

[CoopKill]

You have PayPal...

The gauge for now, meth maybe later if you still have it.

Any idea on wastegates yet?