Printable View
I did:). Took it around the block a couple times after this vid. Ignore the AZ plate, need to register it in IN. Watch it in 720, looks pretty good. Sound is pretty accurate; whine of the twin 340's are about as loud as the exhaust at idle.
http://www.youtube.com/watch?v=6lNS_5ugwj8
How it looked when I entered the garage...
http://i1266.photobucket.com/albums/...psd7b9c4fa.jpg
How it looked after I was done
http://i1266.photobucket.com/albums/...ps7c74d32d.jpg
Where do they sell those hood vents? Looks good :bigthumb:Quote:
Originally Posted by familyMAN
That is a custom made vent, was originally a GT500 vent and he cut it to be the proper width. There is a write-up somewhere, but I'm too lazy to look for it right now.
^Bingo! The write up is on my build page on 3si. Starts here on page 9...Pics of my Billet TD05's - Page 9 - 3000GT/Stealth International Message Center I cut 2.5" out of the center and put it back again.Quote:
Originally Posted by DK77
Does David Copperfield help you out? Looks like you car is just floating in air!
Quote:
Originally Posted by DK77
Was thinking the same thing!!
Is that a 25 row cooler in there?Quote:
Originally Posted by familyMAN
Haha, I have no tires right now... sold the wheels that were on the car and need to refinish/buy tires for the new set. But yeah I got State Farm to lend me David Copperfield during the interim.
Why didn't you put it towards the back of the hood?Quote:
Originally Posted by familyMAN
back of the hood is a high pressure zone, making venting impossible.Quote:
Originally Posted by green-lantern
http://25.media.tumblr.com/tumblr_lt...mdvqo1_500.jpgQuote:
Originally Posted by anyonebutme
lol, nice.
I believe it's 13 row.Quote:
Originally Posted by mb3000
Yep. As an extractor vent, you want it as far forward as possible but behind the radiator. If it were back more towards windshield it wouldn't vent the hot FMIC and radiator air at speed. Some day I may buy a radiator the same height and width as AC condenser so I can move the whole radiator forward and create enough space to duct to vent. So far this is working well though. Intake temps raise less than 20* over ambient on a full pull and cool back off quickly.Quote:
Originally Posted by anyonebutme
http://i353.photobucket.com/albums/r...ps986a1e67.jpgQuote:
Originally Posted by green-lantern
93 sl all stock for now
Attachment 5020
not the wheels. :pQuote:
Originally Posted by B.J.
Completed my weekly engine bay cleaning
http://farm9.staticflickr.com/8249/8...937688cf_z.jpg
DSCN1502 by Solidspetsnaz, on Flickr
I like the MMC on the underside of your hood. My only question is with all the stuff you have deleted, why do you still have ABS?
Looks clean.
Thinking about changing my sig... think anyone will notice?
http://i90.photobucket.com/albums/k2...ps2b0d301b.jpg
Only that your car doesn't have the wheel gap of a 4x4 in the new picture. ;)Quote:
Originally Posted by RealMcCoy
It just looks that way because his windows are rolled up.
Just looking i noticed the different ride height, spoiler, and exhaust change.
Yea, you have a white chevy truck...:lol:Quote:
Originally Posted by RealMcCoy
Man...Your 3/S looks to be really showing it's age.
They are dirty, but run:)....
https://lh5.googleusercontent.com/-C...25283%2529.JPG
Ignore the busted fog on the Monty. Cosmetic fixes and 33's are next:D
Stance, exhaust, front aero, wing...Quote:
Originally Posted by RealMcCoy
Does it have Tiny 9B's as well for extra pulling power too ( aka Torque)Quote:
Originally Posted by familyMAN
No turbo yet. May put one hx35 on it in the future if 3000 stays in one piece for awhile. 400whp would be scary fun in it.
"Drive Me." It says, "It'll be fun." It says.
:(
http://sphotos-b.xx.fbcdn.net/hphoto...42733101_n.jpg
All I can think is that it looks like it has antlers..Better not drive it like that during hunting season ;)
Lmao omg it does.Quote:
Originally Posted by sergechronos
Hmm... :suspect:Quote:
Originally Posted by anyonebutme
Sent from the garage
http://img.tapatalk.com/d/13/03/04/hetuqy9u.jpg
-__-
Sent from my DROID BIONIC using Tapatalk 2
nice. custom crashbar i assume.Quote:
Originally Posted by Julianvr4
Nice. Colour on valve cover? Some kind of bronze right?Quote:
Originally Posted by GeorgeV-3kgt