PDA

View Full Version : Do your seat belts retract?



thor'svr4
11-18-2011, 12:02 AM
In both my 92 RT and my 92 VR4 the seatbelts are loose and sloppy. I can get the seatbelt to ’hug’ me if i feed the seatbelt back into the rewinder, but every time I get out of the car I have to make sure that I put the seatbelt back on the drivers seat otherwise I’ll accidentally close my door on it.

I looked into getting a replacement rewinder last summer but iirc it was going to cost roughly $700 for two new seat belts. At the time I figured I would just cage/harness the car but now its looking like its going to stay a daily driver. Anyone ever take apart there seat belts and maybe adjust the spring or whatever rewinds the belts? Anyone got any ideas on how to fix the problem without spending a small fortune?

I've got a week off school coming up and would like to fix this problem...

oh, i tried the Armor-all tirck and it didnt do anything...

mb3000
11-18-2011, 12:13 AM
I would just pick up a set from a part out. It sounds like yours aren't retracting at all.

$$$PIT
11-18-2011, 01:18 AM
None of mine do either. I also triec the Armor all trick, all it did was make the car stink.

diminished5th
11-18-2011, 02:08 AM
Mine retract but slowly lol, guess I should start looking for parts

Boomer3000
11-18-2011, 04:50 AM
same.. mine suck. But they do something weird.. If I turn the car off and sit there about 30 seconds or so with the belt still on.. I will feel a tug, or jerk motion from it .. Idk its really weird

dukeboy_318
11-18-2011, 04:58 AM
mine don't either

thor'svr4
11-18-2011, 05:03 AM
same.. mine suck. But they do something weird.. If I turn the car off and sit there about 30 seconds or so with the belt still on.. I will feel a tug, or jerk motion from it .. Idk its really weird

mine do that too. but its such a gentle tug that it cant even lift the buckle off the seat.

I’ve thought of getting a set of seatbelts from a partout but figured the chances of getting a good set of seatbelts was about as good as finding dash vents that arent cracked.

$$$PIT
11-18-2011, 05:05 AM
I bet if someone could find a solution for this problem, it would sell out fast.

mb3000
11-18-2011, 09:17 AM
same.. mine suck. But they do something weird.. If I turn the car off and sit there about 30 seconds or so with the belt still on.. I will feel a tug, or jerk motion from it .. Idk its really weird

This has happened in every 3/s I have owned.

Alan92RTTT
11-18-2011, 09:49 AM
Mine stuck.

I clean then with Black Magic interior cleaner. Don't use armor all its crap.

Then they work fine until they get dirty again.

You'll be amazed how much crud you'll remove with a good cleaning. Make sure clean all the places where the belt contacts the car.

a2j
11-18-2011, 09:51 AM
driver seat belt is a little slow. rest are fine. how bout 5point racing harness?

Emilie@GZP
11-18-2011, 10:07 AM
I hated the racing harness in Hans' yellow stealth. they don't retract at all... real annoying for daily driving.

j2k4
11-18-2011, 10:19 AM
As Alan said, cleaning and treating will help, but I got a little extra play by pulling the belt all the way out and running it back and forth over a hot iron to deal with the fine fuzzies that develop over the years.

I finished by carefully sanding the bolt-side of the belt-hanger on the pillar to clean up the pass-thru opening.

Mine don't work like new, but they do work.

UTRacerX9
11-18-2011, 10:22 AM
Mine still work but have gotten a bit slower over the years. (Then again, my car still has under 100k on it, so some of you guys with 150k or more have probably seen yours deteriorate a lot more.)

DrGonzo
11-18-2011, 11:34 AM
The Black Magic cleaner worked great. Mine would not retract at all. Used half a bottle of Black Magic cleaner and a roll of paper towels and they worked great.

They are starting to get a little slow now so about that time to clean them again.

Just pull them all the way out and wipe them down, repeat until they are nice and smooth retracting.

AdamVR4
11-18-2011, 03:06 PM
The Black Magic cleaner worked great. Mine would not retract at all. Used half a bottle of Black Magic cleaner and a roll of paper towels and they worked great.

They are starting to get a little slow now so about that time to clean them again.

Just pull them all the way out and wipe them down, repeat until they are nice and smooth retracting.

Paper towels didn't leave debris all over the belt? Seems like a towel or rag would be a better option..?

DrGonzo
11-18-2011, 03:46 PM
Sorry I use those blue shop paper towels and they hold up good.

box
11-18-2011, 03:53 PM
easy fix, wind all the way out, wash thoroughly with hot soapy water, allow to dry fully, clean the hook thing that the belt slides in and as the belt retracts, give the seatbelt hook/hanger a spray with silicone spray - should work like new again, unless the spring to retract it is faulty

DocWalt
11-18-2011, 05:49 PM
A good cleaning fixed mine for about a year.

That gentle pull is on purpose, it's to tension the belts properly but still let you move them around easily when you get in/out

slage
11-20-2011, 03:50 PM
mine retract just fine after a few light tugs on the belt... :) haven't had to clean them or anything.

green-lantern
11-20-2011, 08:43 PM
I can't imagine putting armor all or black magic on the belts. I put it on my dirtbike seat one time and not only did it chap the hell out of my ass but it was slippery as hell. Not to mention I would think it could weaken the belt. We had to throw any chokers away that got oil on them at work.

Mine do the pull after the car has been off a few seconds but what I love about my seatbelt is it doesn't constrict like a boa constrictor. If I need to get in my pocket I can pull it out some or if it's getting a little tight I can get a little room. Some cars I've had to take the belt off it was f-ing tight and uncomfortable.

thor'svr4
11-21-2011, 12:41 AM
well i tried cleaning them with some black magic and they are a tiny bit better but they still dont retract. if i pull the seatbelt all the way out then let go it will retract about 6" and stop. to get the remaining belt to retract i have to keep tugging lightly on the seatbelt and feed it into the rewinder. maybe my springs are compleatly shot???

Alan92RTTT
11-21-2011, 02:08 AM
did you clean all of the contact parts? You might want to try running sandpaper over the upper roller.

ChargerX3
11-21-2011, 02:37 AM
Hide the solvents and the sandpaper. Lift up the belt, take a knife and lightly chip off the gunk that has adhered to your belt. Its very simple and clean to do!

Dont make this harder than it has to be.