View Full Version : Interior lights - LED
x2xtreme360
09-21-2011, 01:44 PM
What happened to all the write ups on the interior LED conversion? Basically, I know how it all works, but I wanted to know what LED specs people have used that work well and where they were purchased. I remember there was a TON of write ups over on 3si, and now I can't find any.
DrGonzo
09-21-2011, 02:12 PM
Toni had a great write-up and install guide but it looks like he took it all down.
PM him and see if he still has it all.
stealthII
09-22-2011, 02:22 AM
Here ya go. It should open with IE.
LED Modification (http://www.stealthtt.com/3Si/LED%20Modification.mht)
Old site went down... follow the directions in my sig, it should work
x2xtreme360
09-22-2011, 11:55 PM
Thanks StealthII. It works great in IE. And thanks Toni for the info.
I purchased 100 7000mcd 3.3V .02A white LED's today and 100 560Ohm 1/2W 5% resistors today. I will be following the writeup closely for tips, and possibly do my own innovations as well. My white center gauges are always lit, but they dim at night when the interior lights come on (so they don't blind you at night). I think for the main gauge cluster, I will find a way to mock that, so my main cluster is always lit up with my center gauges, and dim when I turn the parking lights on:D
Should be a fun little project.
MADMarc
09-23-2011, 03:00 PM
I want to see some pics when you do it :)
stealthII
09-23-2011, 05:18 PM
Here's a general idea of what yours should look like. Took about 10 hours to get most of the LEDS put in.
http://www.stealthtt.com/pictures/interior/interior_13.jpg
bslade
09-28-2011, 02:46 AM
Here is the Blue version using Toni's guidelines:
http://members.shaw.ca/bslade/blue_l.jpg
Took a long time in the winter in a very cold cold cold garage at nights....
tazman
09-28-2011, 12:56 PM
Is there a way to get the main and center gauges to change colors, like some aftermarket gauges do, with a switch?
bluzvr4
09-28-2011, 01:17 PM
they make color changing leds but i dont know if you could make them work
bslade
09-28-2011, 06:55 PM
Is there a way to get the main and center gauges to change colors, like some aftermarket gauges do, with a switch?
Mine are gauge overlays. Maybe some companies make overlays now that are multicolor. Don't know.
tazman
09-28-2011, 09:00 PM
I meant like (for example) glowshift gauges. Black 7 Color Gauge Series (http://www.glowshiftdirect.com/Black-7-Color-Gauge-Series.aspx)
bluzvr4
09-28-2011, 09:18 PM
i dont think you can do more then 2 colors
B-Man
09-28-2011, 09:27 PM
Someone's done it, but you need some sort of controller to pick the color. Check 3si, I know there were pics/vids from it there.
mehrshadvr4
09-29-2011, 03:33 AM
Here's a general idea of what yours should look like. Took about 10 hours to get most of the LEDS put in.
http://www.stealthtt.com/pictures/interior/interior_13.jpg
what kind of led did you use to get it so bright? i bough some 120degree twist led light and they are not bright at all.
EvilNCarnate
11-24-2011, 06:40 PM
Toni, do you still put together the kits for this that you used to do on 3si?
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.