PDA

View Full Version : Stuck on removing clutch cylinder



berndern15gto
07-14-2011, 11:43 PM
So I got the bolts and pin from under the dash now and I got the reservoir off the cylinder now how do I get the 2 12mm bolts that are holding the cylinder to the firewall?

terrets
07-15-2011, 01:55 AM
Use the force.. Heh, go take a look at the manual on 3sx. Or Ill just :bump: this for you.

marshallh
07-15-2011, 01:11 PM
I bought a set of crows foot wrenches just for this. You REALLY need them on a VR4 but on a FWD you can probably use a 1/4" drive socket or maybe a wobble joint.

zvr4
07-15-2011, 04:52 PM
When I've done it I just used universal joints and possibly a wobbly extension to give myself more angle to work with. A magnet also can help a lot to line it up and to prevent you from losing the bolts when you get the bolts out. Losing them can be a real bitch, I've lost stuff in there that I never saw till I pulled the motor. :lo5l:

FastOldGuy
07-15-2011, 05:08 PM
I heated and bent a wrench at 90 degrees to use. It worked very well its a 10mm IIRC