View Full Version : Barometric pressure sensor
1gRick
05-22-2011, 10:45 PM
Was doing some tuning and threw this cell 'barometric pressure sensor' I know for a fact the MAF is good. The code will not clear. What can it be? PMs.
GTOJOE
05-22-2011, 10:57 PM
The baro sensor is built into the MAF so I don't think it could be anything else. IIRC it operates off 5V and sends data back directly to the ECU. If you check your service manual it will show you how to test the MAF and wiring to the MAF.
When you say it does not clear does it come back the moment you start the car [after you have disconnected the battery]?
Also read this as I went through a similar issues [was due to using the wrong MAF].
http://www.3sgto.org/f13/understanding-maf-part-numbers-344.html
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.