View Full Version : Little help...
peterkottemann
05-15-2011, 11:12 PM
Alright, got a 92TT in the works been sitting for 5+ years and now it time to see what i can do with it. Everything works but the engine. She'll turn over, no spark and no fuel. Everything points to either an ECU problem or a combination fouled MFI relay/ignition coil. What is the more likely problem to be? Local dodge dealership wants $50 just to plug it in and give me the error codes, which I don't want to do. Wondering if anyone else has had a similar problem and can shed some light for me.
GTOJOE
05-16-2011, 06:05 AM
Having no spark and no fuel does seem to point to an ECU. It is very common to have on but not the other... but having neither is odd. Do you have an aftermarket alarm system? Many alarms will cut both of these.
CoreyB
05-16-2011, 12:41 PM
Pull the ECU and check for leaky capacitors. Stealth 316 - ECM Removal (http://www.stealth316.com/2-ecmremoval.htm)
peterkottemann
05-16-2011, 01:20 PM
Having no spark and no fuel does seem to point to an ECU. It is very common to have on but not the other... but having neither is odd. Do you have an aftermarket alarm system? Many alarms will cut both of these.
Very interesting that you would bring that up. I just cut out an aftermarket alarm and remote start(jerry rigged as its a 5spd) that previous owner put in. Theoretically though tht would have fixed the problem would it not?
peterkottemann
05-16-2011, 01:27 PM
big thanks on the link... helpful yet depressing. guess I've gott dust off the old soldering iron...
GTOJOE
05-16-2011, 10:15 PM
Very interesting that you would bring that up. I just cut out an aftermarket alarm and remote start(jerry rigged as its a 5spd) that previous owner put in. Theoretically though tht would have fixed the problem would it not?
Yes in theory this would resolve that. But it's possible it wasn't removed correctly or you forgot to plug something back in when doing it???
big thanks on the link... helpful yet depressing. guess I've gott dust off the old soldering iron...
Does this mean you have checked and there are leaking caps?
Very interesting that you would bring that up. I just cut out an aftermarket alarm and remote start(jerry rigged as its a 5spd) that previous owner put in. Theoretically though tht would have fixed the problem would it not?
provided you properly bipassed the immobiliser (i.e. you didnt just unplug the alarm) then you should be fine. So your ECU had leaky caps then?
peterkottemann
05-17-2011, 01:55 PM
yes, leaking caps unfortunately. everything was reconnected correctly, some electronics that were previously inoperable now work and my radio is picking up stations from 150 miles away now. I'll be tearingmy ecu open this week. I figure even if I screw something up I'm no worse off...
CoreyB
05-17-2011, 02:18 PM
This will help you This is what the ECM looks like with the parts removed in the affected area and after the cleaning operation (http://www.avproecm.com/process1.htm)
peterkottemann
05-17-2011, 06:05 PM
I occasionally repair circuit boards at work, process is almost identical only we use 409 instead of straight acetone, slightly less corrosive I guess.
Emilie@GZP
05-17-2011, 07:24 PM
yes, leaking caps unfortunately. everything was reconnected correctly, some electronics that were previously inoperable now work and my radio is picking up stations from 150 miles away now. I'll be tearingmy ecu open this week. I figure even if I screw something up I'm no worse off...
if you totally botch it, then any place that offers rebuilt ECU's won't credit you the core charge since your core is not rebuildable.
CoopKill
05-17-2011, 10:13 PM
When you getter running, you "WILL" want to do the water pump and timing belt...
5 yrs is a long time to sit for these parts.
peterkottemann
05-17-2011, 11:54 PM
already have the water pump and new timing belt ready to install. I'm not worried about botching it, I guess I'm more worried about what else I'm going to find when I do get it running as it has been sitting. I'm tempted to pull the engine and do a full on rebuild, I really should pull the engine and check everything out. The guy i bought it from was a used car salesman in the worst way, tried to feed me a line of bull about how it was worth 3 times what i paid for it even though it wasn't running. he put a nice yellow paint job directly on top of the danube that was already there with no primer in the meantime... i bought it as a restoration project more than anything.
peterkottemann
05-28-2011, 12:00 AM
Yeah, thanks for all the help guys, I have confirmed, motherboard in ECU is fried. I am going to use the service manual to backtrack all of the circuits on the board and create a detailed post of it, I would strongly suggest that anyone with a 3S have someone swap out their capacitors before they go bad... when they go, it gets really messy. I'm just hoping it can be salvaged at this point.
peterkottemann
05-28-2011, 08:17 AM
confirmed, cannot even get it credited for a core charge. I've got 6' of niobium-titanium, a type 2 superconductor, let's see if I can repair the irrepairable...
Amphiron
05-28-2011, 10:46 PM
Are you building a bench top particle collider?
peterkottemann
05-29-2011, 12:19 PM
no, actually i was thinking more along the lines of a small scale uranium enrichment facility... lol
no, its just a piece of scrap i had been using as a jumper at work, i figure if you're worried about putting too much current through a conductor, get a better conductor. its 50/50/90 rule.
zapman2000
05-29-2011, 01:03 PM
hey if you need replacement caps i will send you a set for cost of shipping since i bought some i got like 10 of each
peterkottemann
05-29-2011, 09:29 PM
okay, are they the OEM rubycon caps?
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.