PDA

View Full Version : PO403 - EGR solenoid



x2xtreme360
04-14-2011, 01:51 PM
Does anyone know what the differences are between the 94-95 EGR solenoids and 96+? Obviously, the 94-95 solenoids have only 2 ports on them, whereas the 96+ have 3 ports. I believe that my 97 actually has a 94-95 solenoid, because it only has 2 ports on it. Of course, I get a CEL for a faulty solenoid.

Modern 3kGT
04-15-2011, 12:48 AM
Subscribed... I just deleted the egr on my 97 vr4 and am getting the same CEL. Do you know of any tricks that might make this go away? I have played with running the vacuum lines in different configurations but it also throws the code eventually. I tried following oohnoo's method but it didn't work for me.

Thanks, John

x2xtreme360
04-15-2011, 12:49 AM
There's no way around it. You'll need to put it back in. My issue is that my solenoid appears to be from a hybrid car, and I don't know if they are compatible.

DuTTch
04-15-2011, 02:31 AM
I hated all those check engine lights , thats why I went 95 ecu lol, all gone. Its like a miracle. I have a a 95 and 96 solenoids (the same I beleive), complete sets. PM hydedw on 3si he found out some interesting stuff on the differences on the 97

x2xtreme360
04-15-2011, 02:40 AM
I use a 95 ECU for everything too.... except inspection:(

Modern 3kGT
04-15-2011, 05:52 PM
Sorry I have done any research yet... but how hard is it to switch over to a 95 ecu?

Thanks, John

DuTTch
04-15-2011, 05:57 PM
plug and play

x2xtreme360
04-16-2011, 04:35 AM
plug and play

Not completely. Almost plug and play by like, 8 pins. The car WILL start with no modification though.

DuTTch
04-16-2011, 12:56 PM
Not completely. Almost plug and play by like, 8 pins. The car WILL start with no modification though.

There was never any modifications made to my harnass and it ran just fine.

x2xtreme360
04-16-2011, 05:18 PM
There was never any modifications made to my harnass and it ran just fine.

Yea, it runs fine with no modification. There are a few pin differences between the 94-95 and 96+ ECU's though.

The engine load pin, turbo meter, O2 heaters, and a few others.