PDA

View Full Version : Do you tell people your crank or wheel horsepower?



Toni
04-13-2011, 03:56 PM
Just curious what you guys say? After getting my car dynoed(finally), I find that saying the hp it put down leaves the general public confused. I say x, they say wow I would have thought it would be more. Then I have to explain whp vs crank etc. It's a pain. I'm thinking about just saying the crank hp. I have a feeling then I'll get issues with people who know what they are talking about and they will start to argue my drivetrain loss estimation.

3KVT
04-13-2011, 04:02 PM
I've been through the whole "I thought it would have been more" talk one too many times as well. However, I feel like WHP is a better description of what your car is actually capable of, due to drivetrain loss. Plus, how many people actually use the crank dynos on their engines? I can't think of many, so my vote goes for giving WHP numbers that you can back up with a dyno sheet, rather than some calculation of what you think it should be at the crank based on WHP. It feels like more of a "real" number to me, if that makes any sense.

Sin'sVr4
04-13-2011, 04:24 PM
I use whp. factory manufacturers use crank, but thats to inflate their numbers. a stock mustang 5.0 is 418 crank, about 370-380 wheels. Might sound better to say crank, but if they say "shoulda been more" then say put your money where your mouth is and stop being a dyno queen! :)

IPD
04-13-2011, 11:02 PM
whp. only posers go around shouting their crank hp.

Sin'sVr4
04-14-2011, 12:00 PM
whp. only posers go around shouting their crank hp.

this^^

green-lantern
04-14-2011, 12:31 PM
I just say it has 900hp....even though it doesn't.

Toni, just tell them XXXAWHP followed by XXXhp at the crank (If they are a car dunce). If they know cars just say AWHP.

How much did you make? Edit: never mind, I just saw you said you are getting ready to dyno.

whitedevilstealth
04-14-2011, 08:04 PM
I say "xxx to the wheels which is about xxx to the motor"

Valhallaz
04-14-2011, 08:30 PM
No... No I don't. I let them guess.

YoshiBishi
04-14-2011, 08:35 PM
I haven't gotten past the part where I try to explain what kind of car I have...

anyonebutme
04-14-2011, 08:46 PM
I tell people it's stock....

a2j
04-14-2011, 09:02 PM
I tell people it's stock....

lol, actually I do too. Always works!

I don't think I'm lying, just telling half the truth.

JasonY
04-14-2011, 10:24 PM
I just shout at them "ITS OVER NINE THOUUSAAAAAND"

Then they never ask again and im left alone about it.

Jason

IPD
04-14-2011, 10:39 PM
I just shout at them "ITS OVER NINE THOUUSAAAAAND"

Then they never ask again and im left alone about it.

Jason

if i hadn't had to leave town before a vanity plate would have arrived in the mail...there's a SIGNIFICANT chance that my plate would now read:

"OVR 9000"

DocHoliday
04-14-2011, 11:53 PM
If I told people my car made 170-180 to the wheels they'd think I'd be driving a Civic.

If it's a car guy I'll say WHP, if it's some average joe I'll just say 220 HP. The car guy probably knows it's not that fast anyway, lol.

TT Eric
04-15-2011, 12:03 AM
WHP, even if they think it's crank, I don't care! :)

Eric

vr3.9
04-15-2011, 12:26 AM
I say it makes 471awhp on a dynapac which is slightly stingier than a Mustang so about 480awhp on a Mustang. But If I was on a Dynojet like most people use it would be 550awhp maybe more. Now count in 25% drive train loss and it's Yea it's well over 700 or 800 horses.... but that's only because my injectors wouldn't flow any more at stock pressure so I've turned up the pressure so it's close to a 1000.

Jk. I just say 471awhp.

Ninja Performance
04-15-2011, 08:53 AM
Unless you pull your "ENGINE" and put it on an engine dyno, there is no way to tell what your crank HP is. You can guess at it. But that's ghey. So AWHP it is.

-Chris

IPD
04-15-2011, 09:38 AM
If I told people my car made 170-180 to the wheels they'd think I'd be driving a Civic.

If it's a car guy I'll say WHP, if it's some average joe I'll just say 220 HP. The car guy probably knows it's not that fast anyway, lol.

you really shouldn't be talking about your hp #'s on an n/a anyways. 20 years ago, those figures might have generated some interest/respect. today, your DOHC makes < a honda accord v6.

95gto
04-15-2011, 02:57 PM
I say it makes 471awhp on a dynapac which is slightly stingier than a Mustang so about 480awhp on a Mustang. But If I was on a Dynojet like most people use it would be 550awhp maybe more. Now count in 25% drive train loss and it's Yea it's well over 700 or 800 horses.... but that's only because my injectors wouldn't flow any more at stock pressure so I've turned up the pressure so it's close to a 1000.

Jk. I just say 471awhp.

Nice.

Unless you are comparing cars that were tested on the same dyno, it really isn't very meaningful to compare numbers. However in my experience most people who have been dyno tested quote whp in place of chp.

JohnnyTurbo
04-15-2011, 03:54 PM
Depends on the crowd. If a Zo6 owner is boasting about having 505 HP, I tell him I have around 535 to his 505. If people are talking wheel HP, I tell them 400 awhp, 435 awtq @ 14 psi with 4 wheel drive.