PDA

View Full Version : Anyone know how to setup your AEM EMS antilag???



Sin'sVr4
04-11-2011, 10:29 PM
i want to get this anti lag set up so i can use it to launch. anyone know how to set it up or have a setup I can test?? I read the manual but not really sure


here is what are currently on my car. I dont even think its on? if i hold the gas down it doesnt spool...Are these setting correct? this was setup up from a previous tuner...

http://i62.photobucket.com/albums/h116/mikepeterson/antilagsetup.jpg

Gearheadvr4
04-11-2011, 11:19 PM
What is the benefit of this versus 2 step?

Frostedbutts
04-12-2011, 12:03 AM
Antilag spools the turbos without the car having to be under load. People use this in conjuction with the 2 step to have spooled turbos before/during a launch.

J. Fast
04-12-2011, 01:27 AM
Very good Trev!

You know how I feel Mike. I don't think you should do it.

Anyone know how to setup your AEM EMS antilag??? (http://www.colorado3s.org/index.php/topic,981.msg12387/topicseen.html#new)

HLxDrummer
04-12-2011, 11:46 AM
Like they said I wouldn't use it unless your putting down some money or something.

On my eManage setup I have it cutting ignition at like 3,500 RPM and it builds a few pounds. I would assume you could do the same. Cutting the ignition (opposed to retarding it) should be a lot better, but I still wouldn't sit on it/use it constantly.

Chris@Rvengeperformance
04-12-2011, 01:17 PM
can't you just setup the 2 step without the anti-lag and not do damage?

Erron Spalsbury
04-12-2011, 02:41 PM
I'll agree with Jer, the ALS system is not one to be taken lightly. It does build a tremendous amount of heat. It does work, works really well actually. Just to give ya an idea, it spooled a GT42 up to 9 psi in a matter of 1 second. The 2 step comes on, then the ALS will engage. It's great for launch control. The NLTS-ALS is a whole 'nother ball of wax. :D

For reference, this was the first time I tried it.

http://www.youtube.com/watch?v=xMm018EO-5Y