View Full Version : How much PSI do I need to run to make 550s act like 510s.
1gRick
03-27-2011, 10:40 PM
How much do I need to drop from stock to do this. PMs
green-lantern
03-27-2011, 11:08 PM
Are you talking fuel pressure? What are you using to tune?
dpartinvr4
03-27-2011, 11:27 PM
Tech: My take on injectors vs. timing control vs. HP with the stock ECU - 3000GT/Stealth International Message Center (http://www.3si.org/forum/f35/tech-my-take-injectors-vs-timing-control-vs-hp-stock-ecu-262353/) .....i think theres a formula in there somewhere.
1gRick
03-27-2011, 11:56 PM
Yes fuel pressure.
1gRick
03-28-2011, 12:00 AM
Thank U dpartinvr4.
tabasco122
03-28-2011, 12:09 AM
whats the stock fuel pressure of the 3s? if its 43.5 (3 bar) then you need to set the fuel pressure to 37.5 to get 510cc
Fuel Injector Calculator from WitchHunter Performance (http://www.witchhunter.com/injectorcalc1.php4)
dpartinvr4
03-28-2011, 01:47 AM
thank u dpartinvr4.
np :)
UTRacerX9
03-28-2011, 11:50 AM
Yes, you'll need about 38 psi. I'm not sure why you'd do this though, 40cc is very easily accounted for by pretty much every AFC made.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.