PDA

View Full Version : Today's Fiasco



onebadmollafolla
03-17-2011, 06:19 PM
I go to replace my rear brake rotor and pads today. I get the wheel and caliper off lickity split, no problem. I then continue to beat the rotor mercilessly with no sign of it moving an inch.

Finally, I break the seal!

http://i.imgur.com/Uxnbw.png

Time to pull this fucker off and put on my new Stop Techs.

http://i.imgur.com/GVzYc.png

*tries grabbing brake and pulling and it won't come off...more pounding ensues*

It won't come off still!

http://i.imgur.com/TZPTc.png

Why is this not coming off?! I know, I'll call Jeremy and see if he has any pro tips as I've never ran into this problem before.

http://i.imgur.com/P9a36.png

*calls Jeremy* Jeremy has no idea either? WTF?!?!

http://i.imgur.com/od3lQ.png

I then get a hammer and a hatchet and profusely beat the rotor until it falls off and I come down to my knees in tears...only to notice one thing....










THE EBRAKE IS ON....

http://i.imgur.com/SPBEn.png

FeaRpb
03-17-2011, 06:26 PM
Hahaha, Wow. That sucks.

Roybatty
03-17-2011, 06:33 PM
:Doh:


the cartoon use .... too funny lol

i3igpete
03-17-2011, 06:35 PM
:lol:

mh3kgt
03-17-2011, 06:46 PM
Haha those pictures were perfect. lolz

Zaroth
03-17-2011, 06:51 PM
ROFL :Clap:



I then get a hammer and a HATCHET

Man. I need to come work on cars with you sometime :p.

mh3kgt
03-17-2011, 07:11 PM
I dunno about you guys, but I always keep a hatchet and machete handy when I'm near the vr4 lol

onebadmollafolla
03-17-2011, 07:27 PM
ROFL :Clap:




Man. I need to come work on cars with you sometime :p.


:lol: I was dual wielding with the hammer and hatchet. (I used the rear/blunt side of the hatchet obviously :p) I didn't have any intent on reusing that rotor.

stealthee
03-17-2011, 07:48 PM
I knew what the issue was before I got halfway thru the story. You shoulda called me. :lol:

AgentOblivious
03-17-2011, 09:35 PM
Nice one...I've found though that sometimes using bolts in the extra holes on the rotor to get it off seems to work better than just hitting it regardless of the e-brake.

Chris@Rvengeperformance
03-18-2011, 01:04 AM
Nice one...I've found though that sometimes using bolts in the extra holes on the rotor to get it off seems to work better than just hitting it regardless of the e-brake.

yeah these are designed to push the rotor off.

AgentOblivious
03-18-2011, 01:52 AM
yeah these are designed to push the rotor off.

I know, why people insist on using hammers instead I'll never understand...

onebadmollafolla
03-18-2011, 03:39 AM
I knew what the issue was before I got halfway thru the story. You shoulda called me. :lol:

You shall most definitely receive a call if another instance like this takes place. I was ready to throw that hammer through every window in my vehicle. :lol:

colt45 gto
03-18-2011, 06:41 AM
hahaha i was thinking to myself while reading it.....e brake is still on! nvm mate its done now, get the new ones on :)

nodoze
03-18-2011, 11:45 PM
lol yea the rears dont have those holes do they?? i know the fronts do beating onthem with a hammer if your going to reuse them is a better idead , i have ran into cracking the rotors using the bolts . if your not reusing them then sure. im a proffesional mechanic and i still beat rotors off .

Chris@Rvengeperformance
03-19-2011, 06:52 PM
lol yea the rears dont have those holes do they?? i know the fronts do beating onthem with a hammer if your going to reuse them is a better idead , i have ran into cracking the rotors using the bolts . if your not reusing them then sure. im a proffesional mechanic and i still beat rotors off .

Yes the rears have press holes.

Use them evenly and they won't crack.



Sent from my DROIDX using Tapatalk

Boomer3000
03-19-2011, 06:58 PM
Ever seen some one wrap a chain around one and then attach it to a go cart?? Makes for a very interesting evening.

nodoze
03-20-2011, 02:45 AM
lmao , i had one on an avenger that was so rusted on that a pry bar and alot of beating and a busted lip finally got it off

Boomer3000
03-21-2011, 04:07 PM
Busted lip?

HilbillyHomeboy
03-22-2011, 10:10 AM
LOL, I didn't know you wrote this up. The bolt holes was the only suggestion I had as well. I never considered the e-brake was on!! The awkward pause was epic though, followed by "uhh, well I gotta go man, later". HAHAHAHAHA!!

Jeremy