View Full Version : Where to pull power from for aftermarket gauges...
Modern 3kGT
03-13-2011, 11:31 PM
I'm in the process of installing my aem a/f ratio and truboost gauges and I am not sure where is best to tap for power. I thought I saw something the other day about a product that was a fuse with a power wire coming off of it. Does this sound right? Is this the best way to get power to the gauges or should I tap in somewhere else?
This kind of has me at a stopping point right now, any advice is appreciated.
Thanks, John
Nihil
03-14-2011, 12:35 AM
I pulled power from the dimmer switch via Jeff's site, when I did mine...
Stealth 316 - Wiring tips - power, lights, and ground connections (http://www.stealth316.com/2-wiring-tips.htm)
That should be all the info you'll need
I don't remember my source right now. but I know its a pretty thick wire (relatively speaking) under the steering wheel area. tru boost, safc, etc...
x2xtreme360
03-14-2011, 01:28 AM
Just tap into the power wire from the stock gauges. It's black with a white stripe. As also said above, you can use the rheostat power feed if you'd like. It's green with a white stripe.
stealthify
03-14-2011, 05:26 AM
I used the dimmer switch for my gauges as well. Just splice in and be sure to tidy it up nicely when you're done.
Does this allow for potential to dim aftermarket gauges?
zapman2000
03-14-2011, 08:25 AM
Only if you tap the output power on the rehostat but if the lights aren't designed to be dimmed itvdoes can be bad also if the gauge gets lights and power from one wire it could damage the gauge by under powering it
HTC EVO
x2xtreme360
03-14-2011, 02:35 PM
Does this allow for potential to dim aftermarket gauges?
Only if the gauges are designed to be dim on the ground circuit. Otherwise, no.
HLxDrummer
03-14-2011, 08:02 PM
Pico 0956PT 10 Amp Mini Fuse Add-A-Circuit Fuse Holder (http://www.google.com/products/catalog?q=add+a+fuse&hl=en&prmd=ivns&resnum=1&biw=1277&bih=616&bav=on.2,or.r_gc.r_pw.&um=1&ie=UTF-8&cid=10733906293614744164&sa=X&ei=fp5-TeypKejB0QHFu8SQCQ&ved=0CGwQ8wIwAg#)
Rheostat for lighting.
x2xtreme360
03-14-2011, 09:46 PM
Pico 0956PT 10 Amp Mini Fuse Add-A-Circuit Fuse Holder (http://www.google.com/products/catalog?q=add+a+fuse&hl=en&prmd=ivns&resnum=1&biw=1277&bih=616&bav=on.2,or.r_gc.r_pw.&um=1&ie=UTF-8&cid=10733906293614744164&sa=X&ei=fp5-TeypKejB0QHFu8SQCQ&ved=0CGwQ8wIwAg#)
Rheostat for lighting.
There's stock gauge power feed right in the dash. I don't understand why everyone seems to use those things when there are sources right in the stock wiring. That way, it isn't a nightmare if you ever have to take things apart.
MADMarc
03-14-2011, 10:09 PM
I'm just asking this as I have the gauges but need to pull my dash. 360, you ended up going with the xline gauges, correct? Did you pull 3-way split on the original power wire for the factory gauges? Any problems by doing that? I know, it SHOULD be adequate for the gauges but I just want to make sure before ripping it apart and then discovering that I need more juice :/
x2xtreme360
03-14-2011, 10:14 PM
I actually pulled a 5 way split on 12V IG power, 12V illum power, AND ground. No issues thus far although I haven't tested them for that long.
The juice isn't the problem. Current draw is. Nothing has blown yet though.
HLxDrummer
03-14-2011, 10:21 PM
I just like the add a fuse because I only have to touch one factory wire. With all the crap in my car I've cut/stripped three factory wires. If I ever want to remove the stuff/go back to stock I won't have hacked up wiring/etc.
Using the dash wires would probably be cleaner though instead of having wires out of the fuse box.
MADMarc
03-15-2011, 01:13 AM
Good idea w/adding a fuse to the box and running it from there. Excuse my ignorance here, 360, but what do you mean by "12V IG power, 12V illum power?"
x2xtreme360
03-15-2011, 01:16 AM
Good idea w/adding a fuse to the box and running it from there. Excuse my ignorance here, 360, but what do you mean by "12V IG power, 12V illum power?"
12V ignition is power when the car is turned on. 12V illumination is when the lights are turned on. It dims the gauges so they aren't as bright when it's dark out.
Rocket
03-15-2011, 01:21 AM
12V Ignition Power, 12v dashlight power...
Same thing I did with my gauges.. I cut off the stock center cluster connector and used those wires to run all 3 gauges in the center cluster. I replaced the stock sending units with the ones that came with the gauges and didn't have to run any wires this way :) The work like champs. Since I hacked up the center pods from the original gauges I figured cutting off the old connector was ok. I may keep the connector with some of the other parts I have hacked out just in case I sell and someone would want to go back stock again. I know how much a pain it is with the '65 mustang to deal with that many hacks to things :P
x2xtreme360
03-15-2011, 01:24 AM
^^exactly. The oil pressure and water temp will be utilizing stock wiring. The oil temp, boost (mechanical), and fuel pressure will get their own wire feeds.
So you can retain the stock sensor/sender for oil pressure and water temp, hooking them straight up to aftermarket gauges without a problem?
DrGonzo
03-15-2011, 09:44 AM
You can retain and reuse the stock wiring for the gauges/senders but the sending units will have to be swapped out. All senders are matched to the gauges and the resistance in the stock sender will be different than those of the after-market sender. If you used an after-market gauge with a stock sender the readings would not be correct.
MADMarc
03-15-2011, 01:32 PM
Ignition and Illumination...durr...my bad hahah. Glad to hear the stock harness works alright then as I didn't want to tie into the rheostat after hearing of people having issues with prosports there and it makes a ton more sense to keep the system in line by converting it all as close to the gauges as possible.
x2xtreme360
03-15-2011, 02:42 PM
So you can retain the stock sensor/sender for oil pressure and water temp, hooking them straight up to aftermarket gauges without a problem?
Still need to swap senders, but the stock wiring can be reused.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.