View Full Version : Topline Engineering ground wire kit $45 shipped!
BigTyla
01-16-2011, 09:52 PM
Kits come in red, smoked black, or blue. The regular kits include 7 wires (all heat-shrunk) and in-depth instructions for installation. Ask anyone who's bought my ground wire kits about the quality and I'm sure you'll hear nothing but good about them.
So how do these help the performance of your car? These kits have been proven to add voltage at the battery, in some cases as much as 1.5 volts. It also helps idle voltage remain at a decent rate so the car doesn't feel like it's about to bog at a stoplight. Startup times are also dramatically decreased. If your stock ground wires are becoming corroded, this is a wise investment. If not, it's good preventative maintenance and a great way to see some extra volts, especially for those of you with sound systems.
Regular price for ground wire kits are $55 shipped, so this group buy gives you a $10 discount, which is almost 20% off. For shipments outside the 50 states, please add $7 to your payment. Canadians add only $2.
To sign up, simply put your screen name, color of kit, and the type of transmission you have (ATX or MTX). I am accepting no more than 14 so that it is easier for me to get all the kits out in a timely fashion. I use a brand of wire produced by Stinger.
ATTENTION: The instructions to the kit will be sent to the email you Paypal with! Please note this when you pay, and if you need them sent to another address please note it in the comments box. Also put the screen name, color of wire and type of trans in the comments box.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
green-lantern
01-16-2011, 11:30 PM
Hey Bro!
I'm still liking my kit. :)
Rom3BreaK
01-17-2011, 12:27 AM
Finally! I've been wondering where you were :D
If anybody's new around here, BigTyla is known to make a top quality ground wire kit, don't hesitate to sign up.
1) Rom3Break, smoked black, MTX
2)
3)
4)
5)
6)
7)
8)
9)
10)
Using this kit myself, definitely recommend it.
2fnloud
01-17-2011, 08:27 AM
What GA do you use?
DrGonzo
01-17-2011, 11:59 AM
Pic's of the kit installed?
Only asking as I have a rear mount battery but still need a ground kit for various engine bay components!
mb3000
01-17-2011, 12:04 PM
Subscribed for pics.
BigTyla
01-17-2011, 11:09 PM
What GA do you use?
4 ga.
Pic's of the kit installed?
Topline Engineering - Ground Wire Kit (http://www.3saudiofaq.com/topline/groundwirekit.html)
SilverJester
01-19-2011, 11:54 AM
I was planning on making my own for the spring, but this is cheap and easier, plus I'm sure it'll look better than anything I would make.
1) Rom3Break, smoked black, MTX
2) SilverJester, red, MTX
3)
4)
5)
6)
7)
8)
9)
10)
2fnloud
01-20-2011, 09:43 AM
1) Rom3Break, smoked black, MTX
2) SilverJester, red, MTX
3) 2fnloud, smoked black, MTX
4)
5)
6)
7)
8)
9)
10)
BigTyla
01-23-2011, 03:56 PM
bumping
crazymofo63
01-23-2011, 11:34 PM
ahh finally i was gonna purchase some ebay ones...:ohnoes: i'll take one in red plz and at the end when there's 10 buyers is when we send payment i assume?
lmk and thanks man,
Jon
1) Rom3Break, smoked black, MTX
2) SilverJester, red, MTX
3) 2fnloud, smoked black, MTX
4)crazymofo63, red, MTX
5)
6)
7)
8)
9)
10)
BigTyla
01-24-2011, 12:17 AM
ahh finally i was gonna purchase some ebay ones...:ohnoes: i'll take one in red plz and at the end when there's 10 buyers is when we send payment i assume?
lmk and thanks man,
Jon
Yes, I will post in the thread when I begin taking payments.
MADMarc
01-24-2011, 01:26 AM
Toss me on the list :)
1) Rom3Break, smoked black, MTX
2) SilverJester, red, MTX
3) 2fnloud, smoked black, MTX
4)crazymofo63, red, MTX
5)MADMarc, smoked black, MTX
6)
7)
8)
9)
10)
FreedomX10A
01-24-2011, 04:37 AM
FreedomX10A, red, MTX
FreedomX10A
01-24-2011, 04:37 AM
1) Rom3Break, smoked black, MTX
2) SilverJester, red, MTX
3) 2fnloud, smoked black, MTX
4) crazymofo63, red, MTX
5) MADMarc, smoked black, MTX
6) FreedomX10A, red, MTX
7)
8)
9)
10)
BigTyla
01-27-2011, 07:00 PM
Going to give this thread a friendly bump. Let's get 4 more in here if we can.
MADMarc
01-27-2011, 11:41 PM
What happens if we don't? :(
Edit: lol at the angry face that's supposed to be sad
BigTyla
01-28-2011, 07:55 PM
What happens if we don't? :(
Edit: lol at the angry face that's supposed to be sad
Group buy will happen with or without 10.
MADMarc
01-29-2011, 01:09 AM
Woop woop!
BigTyla
01-31-2011, 08:13 PM
One last bump before I begin taking up payments.
BigTyla
02-02-2011, 09:30 PM
I will begin taking payments. Please do the following:
1) In the subject section of the PayPal payment, put your screen name
2) In the comments section, put the color of wire you desire and the type of transmission your car has (ATX or MTX).
3) Send the payment to autylerw53@gmail.com
jessecain1
02-02-2011, 11:13 PM
1) Rom3Break, smoked black, MTX
2) SilverJester, red, MTX
3) 2fnloud, smoked black, MTX
4) crazymofo63, red, MTX
5) MADMarc, smoked black, MTX
6) FreedomX10A, red, MTX
7)jessecain1,smoked black,MTX
8)
9)
10)
Can't wait heard nothing but good things about these kits!!!!!!!!!!
Rom3BreaK
02-02-2011, 11:14 PM
I should be all settled up!
jessecain1
02-02-2011, 11:32 PM
hey big tyla too late to change my color choice to red! im pretty indecisive lol....
MADMarc
02-03-2011, 02:49 AM
Just sent the funds.
2fnloud
02-03-2011, 03:53 PM
Payment sent
Vishnu
02-03-2011, 05:46 PM
1) Rom3Break, smoked black, MTX
2) SilverJester, red, MTX
3) 2fnloud, smoked black, MTX
4) crazymofo63, red, MTX
5) MADMarc, smoked black, MTX
6) FreedomX10A, red, MTX
7)jessecain1,smoked black,MTX
8)Vishnu, smoked black, MTX
9)
10)
BigTyla
02-03-2011, 11:20 PM
1) Rom3Break, smoked black, MTX
2) SilverJester, red, MTX
3) 2fnloud, smoked black, MTX
4) crazymofo63, red, MTX
5) MADMarc, smoked black, MTX
6) FreedomX10A, red, MTX
7)jessecain1,red,MTX
8)Vishnu, smoked black, MTX
9)
10)
Fixed it for you jessecain1.
Everyone go ahead and send in your payments if you haven't already.
Vishnu
02-04-2011, 03:41 AM
payment sent.
BigTyla
02-04-2011, 01:06 PM
1) Rom3Break, smoked black, MTX
2) SilverJester, red, MTX
3) 2fnloud, smoked black, MTX
4) crazymofo63, red, MTX
5) MADMarc, smoked black, MTX
6) FreedomX10A, red, MTX
7) jessecain1,red,MTX
8) Vishnu, smoked black, MTX
9)
10)
Those in bold have paid.
BigTyla
02-05-2011, 07:33 PM
Still waiting for the other three before I place orders for the materials.
jessecain1
02-06-2011, 08:27 PM
come on guys pay i want my kit:biggrin:
MADMarc
02-06-2011, 09:08 PM
Meee tooooo :D
2fnloud
02-06-2011, 09:27 PM
Oh why not
Me three.
1) Rom3Break, smoked black, MTX
2) SilverJester, red, MTX
3) 2fnloud, smoked black, MTX
4) crazymofo63, red, MTX
5) MADMarc, smoked black, MTX
6) FreedomX10A, red, MTX
7)jessecain1,red,MTX
8)Vishnu, smoked black, MTX
9)j2k4, Red, MTX
10)
MADMarc
02-08-2011, 01:45 PM
Uuugh......where are the other guys? :/
MADMarc
02-08-2011, 02:56 PM
Have you shot them any PMs, Tyla? I dont want to go shooting them doubles to aggravate them if they are just waiting on paychecks this weekend or something.
BigTyla
02-08-2011, 09:47 PM
Going to send PMs to those who haven't paid tonight. I'll be ordering all parts by Saturday so if the payments aren't in they will have to wait until the next group buy or order at the normal price.
BigTyla
02-08-2011, 10:58 PM
1) Rom3Break, smoked black, MTX
2) SilverJester, red, MTX
3) 2fnloud, smoked black, MTX
4) crazymofo63, red, MTX
5) MADMarc, smoked black, MTX
6) FreedomX10A, red, MTX
7) jessecain1,red,MTX
8) Vishnu, smoked black, MTX
9) j2k4, Red, MTX
10)
BigTyla
02-08-2011, 11:01 PM
PMs have been sent.
jessecain1
02-08-2011, 11:47 PM
PMs have been sent.
good stuff
crazymofo63
02-09-2011, 10:44 AM
payment sent, sorry about the hold up.
jon
payment sent, sorry about the hold up.
jon
Good man.
MADMarc
02-09-2011, 01:23 PM
Hot damn! ;)
BigTyla
02-09-2011, 06:59 PM
1) Rom3Break, smoked black, MTX
2) SilverJester, red, MTX
3) 2fnloud, smoked black, MTX
4) crazymofo63, red, MTX
5) MADMarc, smoked black, MTX
6) FreedomX10A, red, MTX
7) jessecain1,red,MTX
8) Vishnu, smoked black, MTX
9) j2k4, Red, MTX
10)
SilverJester
02-09-2011, 10:44 PM
Payment sent, sorry I didn't see he was taking payments until I got the PM.
Roybatty
02-10-2011, 12:09 AM
1) Rom3Break, smoked black, MTX
2) SilverJester, red, MTX
3) 2fnloud, smoked black, MTX
4) crazymofo63, red, MTX
5) MADMarc, smoked black, MTX
6) FreedomX10A, red, MTX
7) jessecain1,red,MTX
8) Vishnu, smoked black, MTX
9) j2k4, Red, MTX
10)Roybatty, smoked black, MTX
=) Hope not too late
Payment sent.
MADMarc
02-10-2011, 12:39 AM
Right on. That's 10/10! :D
n2nsanity
02-14-2011, 06:21 AM
how well would this work for people with the battery trunk relocation kit? Would you just run a 0 or 4ga ground from the trunk to the engine bay and connect it to a separate terminal? It would be the same thing, just not directly on the battery. Would the distance make it lose effectiveness?
2fnloud
02-14-2011, 08:14 AM
There is charts out there that tell you how big your gauge needs to be. It is based of the amount of amperage traveling through the wire and the length of the wire.
http://i202.photobucket.com/albums/aa177/2fnloud/Orion%20amplifiers/WireLength.jpg
But most if not all people would say that you just ground your battery to the chassis in the trunk.
Only one time have I ran a separate power and ground wires from the rear batteries to the front battery, but that was for a high current sound system.
With all the ground points that BigTyla's kit re-does, you should have no problem just grounding you rear battery to the chassis back in the hatch area. The important thing would be to properly prepare the surface of the metal that you will be attatching the ground to.
n2nsanity
02-14-2011, 10:07 AM
thanks, good info, so there is degradation over length
most of the kits are designed so that all the grounds attach directly to the post on the battery.
if it's in the trunk, none of them will be directly attached
was just wondering if that would make a noticeable difference
2fnloud
02-14-2011, 10:19 AM
thanks, good info, so there is degradation over length
most of the kits are designed so that all the grounds attach directly to the post on the battery.
if it's in the trunk, none of them will be directly attached
was just wondering if that would make a noticeable difference
More accurately, the resistance rises as the length gets longer. That is why the gauge needs to get bigger as the length gets longer.
I know not all of the wires in BigTyla's kit go directly to the battery. For example, you would remove the wire ribbon from the engine block to the chassis and replace it with his 4GA wire.
In your case I would install BigTyla's kit, anything that would of run to the battery negative I would bolt together, in addition I would have one extra wire off that bolted bunch to ground to the chassis.
This way you have all the kit installed as if the battery was under the hood. You just would have the 1/0 gauge running back to the positive of the battery in the hatch and ground the battery to the chassis in the hatch. Make sense?
IronmanTT
02-14-2011, 01:21 PM
Are you still selling these??
n2nsanity
02-14-2011, 02:58 PM
makes sense, and that was my plan
was just also thinking about running an additional ground following the same path as the positive cable
will probably just end up doing 2 really good grounds in the trunk
2fnloud
02-14-2011, 03:57 PM
makes sense, and that was my plan
was just also thinking about running an additional ground following the same path as the positive cable
will probably just end up doing 2 really good grounds in the trunk
Why two? With as short as the length is going to be, one 0 gauge will be more than adaquit.
BigTyla
02-14-2011, 09:57 PM
Are you still selling these??
I'm always selling at the $55 rate, but I will likely hold another group buy for $45 next month if you want to wait to save $10.
As far as battery relocation, I have had multiple customers buy my kit with a battery in the back. They have all been happy.
BigTyla
02-17-2011, 09:31 PM
I have received the materials and will be working on these this weekend.
2fnloud
02-17-2011, 09:59 PM
Woot!!
More stuff for the pile-o-parts.:D
MADMarc
02-18-2011, 01:58 AM
More stuff for the pile-o-parts.:D
lol seriously
2fnloud
02-18-2011, 09:18 AM
I never understood the letting you new parts pile up, but I am slowly accumulating them myself.
The Stealth has been sitting on my buddy's hoist waiting for us both to shake loose for the 120K, 3G lifters, Teins, control arms, and a bunch of other stuff - just keeping her solid for the next steps.
I thought we'd be on it by now, but events have interceded, delaying the winter wrench-session.
2fnloud
02-18-2011, 10:50 AM
I had a Daughter eight months after I bought my Stealth, I know what you mean. Fortunately my 3s was and still is in immaculate shape with 28,xxx miles.
I had a Daughter eight months after I bought my Stealth, I know what you mean. Fortunately my 3s was and still is in immaculate shape with 28,xxx miles.
Yeah, that's one pretty Stealth.
Mine is very solid at 140K; it could use paint, but mechanically it's fresh (doing the 120K for peace of mind) and rust-free.
The driver's seat is just rough enough that I'm going to get in on the leatherseats.com GB, too.
Want to have it ready for the Wisconsin Dells gathering in May.
BigTyla
02-23-2011, 08:26 PM
I'm rounding out the last few kits in anticipation for delivery this weekend.
2fnloud
02-23-2011, 09:48 PM
very nice
jessecain1
02-23-2011, 10:01 PM
cant wait even added them to my sig lol :D
crazymofo63
02-24-2011, 03:44 AM
Awsome so what are we looking at in terms of when will they be shipped?..
Big thanks,
Jon
BigTyla
02-24-2011, 07:44 PM
They will be shipped out Monday via priority so they should be at your doorstep by Wed/Thurs.
crazymofo63
02-25-2011, 05:08 PM
O hells yea I can't wait.
Thanks again,
Jon
Vishnu
03-01-2011, 12:12 PM
Recieved my shipping confirmation yesterday.
2fnloud
03-01-2011, 07:55 PM
Me too
Rom3BreaK
03-01-2011, 08:40 PM
Oh why not
Me three.
Had to do it
BigTyla
03-02-2011, 10:44 PM
Quick note on instructions: they are shipped with your wires. Make sure you pull them out before you throw the package away!
jessecain1
03-02-2011, 11:36 PM
hey i didnt get a tracking number could you pm it if you still got mine? im in blaine washington if that helps :D
Roybatty
03-03-2011, 04:08 PM
Got my package from topline thanks BT
Sent from my Eris using Tapatalk
SilverJester
03-03-2011, 04:27 PM
Got mine today, they look top notch. I'll be installing them tomorrow.
jessecain1
03-03-2011, 10:55 PM
wow that was fast shipping! now if only i could get 3sx to be that fast lol.....looks really well made thanks bigtyla
MADMarc
03-04-2011, 02:01 AM
Just received them in the mail today. Thanks for the quick shipping :)
Got mine, too.
Good bling; excellent stuff.
BigTyla
03-09-2011, 12:44 AM
When you all get your kits, be sure to leave feedback for me and I'll do the same.
jessecain1
03-09-2011, 01:04 AM
how do you leave this feedback....been wondering for quite some time probably bought around twenty or more things from members the last year and never did figure it out
Roybatty
03-09-2011, 07:16 AM
how do you leave this feedback....been wondering for quite some time probably bought around twenty or more things from members the last year and never did figure it out
In for info in this also, not same as other site. There are threads in vendor section for kudos/complaints.
Sent from my Eris using Tapatalk
Rom3BreaK
03-09-2011, 07:28 PM
View profile of member you want to leave feedback for, select the feedback score tab, and then click submit feedback for user name
2fnloud
03-09-2011, 09:20 PM
Feedback left.
Roybatty
03-13-2011, 07:56 PM
ditto
Matt3000GT
04-08-2012, 11:50 PM
1) Rom3Break, smoked black, MTX
2) SilverJester, red, MTX
3) 2fnloud, smoked black, MTX
4) Matt3000GT, red, MTX
5)
6)
7)
8)
9)
10)
Matt3000GT
04-09-2012, 12:02 AM
1) Rom3Break, smoked black, MTX
2) SilverJester, red, MTX
3) 2fnloud, smoked black, MTX
4) Matt3000GT, red, MTX
5)
6)
7)
8)
9)
10)
fridayda13th
06-12-2012, 05:35 PM
Is the group buy still goin ill take a set
BigTyla
06-12-2012, 05:48 PM
You can order from here: Topline Engineering - Ground Wire Kit (http://www.3saudiofaq.com/topline/groundwirekit.html).
fridayda13th
06-13-2012, 07:04 PM
Cool I order it
spaceace60
03-29-2014, 02:39 PM
I know post is old but do u still have any? or even a diagram to show connection locations? thanks Jim
btw why so many as I thought u can have a million and current will still only use 1 path of least resistance?
Disrupter
03-29-2014, 09:26 PM
I know post is old but do u still have any? or even a diagram to show connection locations? thanks Jim
btw why so many as I thought u can have a million and current will still only use 1 path of least resistance?
I'll have my kit never used for sale shortly. The kit is red.
BigTyla
03-31-2014, 02:54 PM
Yes, I still sell these. Topline Engineering - Ground Wire Kit (http://www.3saudiofaq.com/topline/groundwirekit.html)
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.