FS: Stainless Steel Door Trim Replacement $80 Shipped

[Atrosity]

So I have taken the time to perfect the lower door trims I have created. These door trims replace the ugly carpet on the door made from high quality 14 gauge stainless steel.The front center piece of the door trim is cut out for the buyer to add what ever inlay they want to add, you can glue it on or tape it on the inside.

These door trims are a stock replacement which means there is no modification and no drilling needed to do on the doorpanel, you do not even have to remove your door panel to install these. I proved the hardware necessary for the installation of these as well. PM Me if you have any questions or want to purchase.

In the future I plan on making a full Stainless Steel Interior Trims for our cars including the shifter ring and speaker covers. These are also great if you want to paint them to match your current interior.


http://img87.imageshack.us/img87/8599/dsc02374h0.jpg
http://img408.imageshack.us/img408/3908/dsc02375j.jpg
http://img37.imageshack.us/img37/6402/dsc023760.jpg
http://img573.imageshack.us/img573/4706/dsc023770.jpg
http://img210.imageshack.us/img210/385/dsc02378gx.jpg


HOW IT'S MADE

http://www.youtube.com/watch?v=bbsruchjk-A

[MADMarc]

Eric, this is totally off topic (gl w/the sale btw) but how is that vinyl dye holding up after you made everything black?

[Atrosity]

Eric, this is totally off topic (gl w/the sale btw) but how is that vinyl dye holding up after you made everything black?

It's been a year and still holding very well, It still has it's shine! :D

I just need to finish restoring full interior so that everything will look nice so I took the liberty to make some of things I want in my car and I will offer it to the 3S Community

[IPD]

subscribed for the day you offer an entire interior trim set in anodized black.

[Atrosity]

Bump guys! Get 'em while they are hott!

[jessecain1]

hey do you also sell the door handle trim as seen in the picture?

[CoopKill]

VR4, or Twin Turbo options?

[DrGonzo]

Ohh I like!

Question???? What goes in the middle slot that is cut out? I can still see the slots/holes in the door panel where the original panels would go.

[CoopKill]

The fabric or material, and colors of your liking.

[Atrosity]

The fabric or material, and colors of your liking.

That is correct. I will not be providing anything for the section just because so many people want so many different options. A lot of people want to match there trims, carbonfiber, material on the seats and etc. It looks good regardless and I hope to see pictures to see what people come up with.

If you guys want carbon fiber, I can order that for you for an additional 20 dollars.. the lead time would be longer though.

[Atrosity]

VR4, or Twin Turbo options?

I can do Twin Turbo as seen in pictures for an additional 20 dollars as well as stock font 3000GT.

[Atrosity]

hey do you also sell the door handle trim as seen in the picture?

I do not, do you have a door handle trim I can look at? I might be able to make it.

[CoopKill]

VR4, or Twin Turbo options?

This?

[Atrosity]

This?
How ever do to slight changes in the drawing, the logo maybe smaller to accommodate the mounting hole or spaced differently.
http://img17.imageshack.us/img17/2279/photo9ul.jpg

[CoopKill]

That's sexy as hell!

I have to wait till after the holidays do to already spending before getting the Mrs. present (2 pc aluminum drive shaft), but will be getting a hold of you soon!

[Atrosity]

That's sexy as hell!

I have to wait till after the holidays do to already spending before getting the Mrs. present (2 pc aluminum drive shaft), but will be getting a hold of you soon!


I will have it prepared and ready for you when you want to purchase.

[Atrosity]

Bump! I have more! :D

[Atrosity]

After Xmas Sale!!

$50 per pair!