PDA

View Full Version : Engine/Tranny Combined Weight



Blurr
11-01-2010, 09:27 PM
Just curious to know what the combined weight of a turbo engine/tranny combination weighs in at. Roughly is fine if no exact number is known.

Austin@STM
11-01-2010, 09:48 PM
its heavy if that helps :P

stealthee
11-01-2010, 10:07 PM
Trans weighs in around 150 lbs if memory serves correctly. The engine is likely around 400 lbs with all accessories, best guess.

mcshooter
11-01-2010, 10:13 PM
usp showed my auto tranny with tourque converted is 180 lbs

stealthee
11-01-2010, 10:16 PM
I know thats wrong, thats on the light side. The trans itself weighs 160 lbs. The torque converter weighs 38 lbs.

But that being said, the ATX weighs more than an AWD trans, which is what the OP is asking about.

Atrosity
11-01-2010, 10:28 PM
Weatherman Ollie Williams Says "It's Heavy"
http://www.marcbenton.com/wp-content/uploads/2010/01/OllieWilliams.jpg

Thank you Ollie

Unknownvr4
11-01-2010, 10:31 PM
Well i just tried to put my motor and trans together on my parents scale and it broke. They then beat me until i cried.























Kidding lol
No seriously though, im not sure too many people have actually weighed the motor. Why do you ask though?

SpdDmnVR4
11-01-2010, 10:46 PM
Its near the 600 lb range... nothing lightweight about these cars

thor'svr4
11-02-2010, 02:15 AM
i was sure that i saw somewhere in the trans service manual that the 5 speed awd trans is 138lbs (clutch not included). of course i cant find it now. :Doh:

Blurr
11-02-2010, 02:45 AM
Excellent. Wanted to know because I didn't want to overload my engine hoist on the most extended arm setting (1/2 ton). I figured that the engine/tranny combo wasn't 1000lbs but I wanted to make sure first.

GordonRamsey
11-02-2010, 09:23 AM
HMMM now I wonder what the N/A weighs. I guess 135 pounds is why GTWizard didnt want to swap one into his FWD monster.

stealthee
11-02-2010, 07:42 PM
The NA trans weighs around 140 IIRC. The reason GT Wizard would be foolish to put one in his car is because the gearing would kill his power.

stealthee
11-02-2010, 10:22 PM
stealth i did not weigh it , it was done by our ups guy. he was on office duty as he slipped on ice, they knew it was over there 150 lb limit and he brougth it out in his own pickup and said he wanted to know what the actual was and also to get out of the office for a change . he had delievered so many mitsu boxes here i got to know him, he wondered if we were building a car from scratch. jk . maybe the ups scale was off .

I didn't say you did, I just said that was on the light side. I shipped one last summer and weighed it all. The thing is a beast though, thats for sure.

Mike-92RT
11-03-2010, 01:49 AM
cast iron engine block, along with the iron crankshaft (if its a 1g) prolly will weigh 150 pounds

cylinder heads are prolly 30 or 40lbs a piece

N/A transmission will be roughly 130lbs